Management Industrial Ethernet Switch

Model:	AEO-HD812M-8E
Brand:	AEO
Origin:	Made In China
Category:	Security & Protection / Surveillance Equipment
Label:	Management , Industrial , Switch
Price:	US $187 / pc
Min. Order:	5 pc

Inquire Now

Product Description

Email: tina@aeo-cctv.com skype:karlie@aeo-cctv.com Tel:86-755-86276677

Product Introduction

The device of Managed Industrial Ethernet Optical Switch adopts industrial redundant ring network design to transfer multiple 1080P HD network signals without delay over one single fiber, the max transmitting distance between two adjacent devices is up to 100 KM (0~20/40/60/80/100 KM are optional). It can be connected hand-in-hand with each other through the cascade to form a ring network topology. The redundant ring network structure not only can reduce the risk of the transmission of data signal, but also it simplifies engineering installation and lowers the engineering cost. The design of industrial redundant ring network is to realize stability, reliability and real-time performance of data transmission in harsh environments. Together with the embedded WEB mastering control Sever, it becomes easy for the control of network management.

Product Description

● Compatible with IEEE802.3/802.3U/802.3X/802.3D/802.3W protocols

● Supports WEB mastering setting, easy for control

● Supports 8K MAC address

● Supports full duplex and half-duplex transmission mode, and with automatic negotiation ability

● With APC circuit, constant output optical power, large dynamic range

● Advanced adaptive technology, without the need for on-site electrical or optical adjustment when using

● Provide ultra low latency data transmission

● Ethernet interface can be adaptive to parallel lines / crossover cable connection

● The long distance between 2 adjacent devices is up to 100 KM

● Design with industrial level, IP30 grade of surge protection

● Redundant dual DC power input, power supply overload protection, Anti-reverse polarity protection

Technical Parameter

Item	Description
Network interface	10/100Base-T(X) Self-adaptive Ethernet port
Transmitting rate	100 Mbps
Network port attributes	The connector type：RJ 45 Compatible with IEEE802.3/802.3u/802.3ab protocols. Supports full duplex and half-duplex transmission mode, and with automatic negotiation ability Supports self-adaptive MDI/MDI-X
Optical wavelength	1310 nm/1550 nm
Optical interface	SC、LC、FC Optional
Optical port attributes	Optical power ≥－10dBm Receiving sensitive ≤-24dBm
Backplane bandwidth	7.6 G
Cache	1Mbit
Max frame size	1632 bytes
Delay	<1 µS
BER	<1/1000000000
Transmitting distance	Single fiber single mode 0~100 KM
Rated input voltage	DC 12 V~ 48 V （DC 48 V for PoE solution）
ESD electrostatic protection (Ethernet)	±8 KV Contact discharge ±15 KV Air discharge
Surge protection （Ethernet）	Common mode ±4 KV(10/700 µS) Differential mode ±2 KV(10/700 µS)
Surge protection （Power supply）	5000 A(8/20 µS)
Power consumption	<5 W
Working temperature	-40℃ ~ 85℃
Working humidity	5% ~ 90%
Dimension (Length × Width × Height)	184 x 181 x 53.5 mm
Weight	1.3KG