Pneumatic Pipe Chamfering Machine

The ID-Mounted beveling operation utilizes an expandable mandrel which is slid into the open end of the pipe. A draw nut is tightened, which expands the mandrel blocks up a ramp and against the ID surface for positive mounting, self centered and squared to the bore. As the tool bit is fed into the material from the end, a bevel is produced which conforms to the angle predetermined by the angle ground into the bit. Bits are available for practically any material or beveling angle required, and bits can be custom made for any form tooling operation.

 Features:

• Pneumatic Motor 
• On-site cold Beveling improves safety    
• Easy set-up & Operation
• Self-Centering    
• Can be positioned in any direction              
• Feed ratchet spanner makes tool feed / back easily
• Light weight and compact design

 Spcification:

• Model	Working Range (ID-OD)		Wall Thickness	Rotation Speed	Air Pressure	Air Consumption
  ISP-30	Φ18-30	1/2’’-3/4’’	≤15	60r/min	0.6MPa	900L/min
  ISP-80	Φ28-89	1’’-3’’	≤15	50r/min	0.6Mpa	900L/min
  ISP-120	Φ40-120	11/4’’-4’’	≤15	38r/min	0.6 MPa	900L/min
  ISP-159	Φ65-159	21/2’’-5’’	≤20	35r/min	0.6Mpa	1000L/min
  ISP-252-1	Φ80-273	3’’-10’’	≤20	16r/min	0.6Mpa	1000L/min
  ISP-252-2			≤75	16r/min	0.6Mpa	1000L/min
  ISP-352-1	Φ150-356	6’’-14’’	≤20	14r/min	0.7Mpa	1200L/min
  ISP-352-2			≤75	14r/min	0.7Mpa	1200L/min
  ISP-426-1	Φ273-426	10’’-16’’	≤20	12r/min	0.7Mpa	1500L/min
  ISP-426-2			≤75	12r/min	0.7Mpa	1500L/min
  ISP-630-1	Φ300-630	12’’-24’’	≤20	10r/min	0.7Mpa	1500L/min
  ISP-630-2			≤75	10r/min	0.7Mpa	1500L/min
  ISP-850-1	Φ490-850	24’’-34’’	≤20	9r/min	0.8Mpa	1500L/min
  ISP-850-2			≤75	9r/min	0.8MPa	1500L/min