Pipe Cold Cutting And Beveling Machine

The series machine is ideal for all types of pipe cutting, beveling and end preparation. The split frame design allows the machine to split in half at the frame and mount around the OD of the in-line pipe or fittings for strong, stable clamping. The equipment performs precision in-line cut or simultaneous cut/bevel, single point, counterbore and flange facing operations, as well as weld end preparation on open ended pipe.

Features:

• Cold Cutting and Beveling improves safety      
• Cutting and Beveling simultaneous                   
• Split Frame: easy mounted on pipeline
• Tools feed automatically
• Fast, Precision, On-site Beveling
• Minimal Axial and Radial clearance
• Light weight and compact design
• Easy set-up & Operation
• Electric or Pneumatic or Hydraulic driven
• Machining heavy-wall pipe from 3/4” up to 56

 Order Guide 

Before you place order to us, please let us know the following information:

1.The pipe I.D ,O.D.

2Wall Thickness 

3.The material of the pipe and the enviroment of the site and the requirement of the end face.

4.Driven:Electric,pneumatic.

5.The type of beveling. The normally type is the v and U,if you have any special requirement, please let us know it,

Then it will be more convient for all of us to make an immediately decision .