Specifications

Chevron conveyor belt 
According to herringbone height, there are three kings(high, middle, low). 
width:500-1200mm

Chevron Conveyor Belt comes with an advantage of being integrally moulded as a part of the top surface. It is comprised of chevron cleats that boost the quantity of granular materials, especially in heavy duty incline applications. This type of belt is suitable for conveying sand, fine coal and grain materials by using steep inclines, for joining by vulcanizing or by mechanical fasteners.

 

Technical data of chevron belt

 

 

 

 

Special Features:

 

»   High quality fabric with low stretch.

 

»   Cleat angle and pitch are designed for smooth travel cover over return idlers.

 

»   Higher angle of 17° - 30° of incline.

 

»   Wear resistant and oil resistant black rubber quality is available.

 

Construction of our rubber conveyor belt

1.        EP fabric Carcass( Warp is polyester and weft is polyamide)

2.        NN fabric Carcass( Warp and weft both nylon)

3.        Steel cord (ST630-ST6300)

4.        Special rubber layer with good fabric adhesion properties( skimmed layer)

5.        Cover rubber( special quality requirement)

Advantage of our conveyor belting

1.        Light weight, thin

2.        High elasticity

3.        Impact resistant

4.        Low elongation

5.        Good flexibility and good through ability

6.        High abrasion

Application of our conveyor belt

1.        Cement, concrete plants, bulk handling

2.        Coal, mining, sand, gravel, stone crusher

3.        Steel industry, heating and power

4.        Road construction machinery, etc

Conveyor belt specification

Fabric type	Fabric structure		Fabric type	Fabric thickness	Cover rubber thickness		Width	Length
	warp	weft			Upper	Lower
EP	EP	EP	EP-100	0.75	1.5-8	0-4.5	400-2500	<=300/roll
			EP-150	0.8
			EP-200	0.90			500-2500
			EP-250	1.15
			EP-300	1.25
			EP-400	1.45			800-2500
			EP-500	1.55

 

 

 

 

 

 

Conveyor belt technical data sheet  

We could offer conveyor belt with cover grade in accordance to International standard such as DIN 22102, RMA, AS 1332, SABS 1173/2000, IS 1891, BS 490, JIS K 6322, etc

Standards	Cover Rubber			Adhesion
	Tensile Strength	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
DIN 22102	Mpa	%	mm3	N/mm   (≤1.5mm)	N/mm   (>1.5mm)	N/mm
DIN 22102-Z	15	350	250	3.5	4.5	5
DIN 22102-W	18	400	90	3.5	4.5	5
DIN 22102-Y	20	400	150	3.5	4.5	5
DIN 22102-X	25	450	120	3.5	4.5	5

 

Standards	Cover Rubber			Adhesion
	Tensile StrengTD	Elongation at break	Abrasion	Cover to Ply	Cover to Ply	Ply to Ply
AS 1332	Mpa	%	mm3	N/mm   (≤1.9mm)	N/mm   (>1.9mm)	N/mm
AS 1332-N17	17	400	200	4	4.8	6
AS 1332-M24	24	450	125	4	4.8	6