Heat Resistance Epoxy Resin Adhesive
Epoxy Adhesive is a two-part, high polymer which solidifies very hard once fully cured in dua and ideal for complex, multi-piece assemblies.
It is used in the bonding of hard materials such as Metal, Ceramics, Stone Material, Concrete, and hard plastic material.
Features of epoxy adhesive :
This product is an important component of epoxy resin
High bonding strength.
Curing at ambient temperature, the hardening process of small contraction
After curing, toughness, excellent anti impact ability
Anti ageing, resistance to corrosion, good heat resistance.
Cautions:
? Keep away from direct sunlight
? Store in cool and dry place
? Eye irritant, if eye contact occurs, flush with water, seek medical advice at once
? Prevent direct contact with skin, if skin bonding occurs, soak in warm soapy water
and pull apart gently
? Keep out reach of children and pets
? Seal the open end tightly to prevent it from volatilization
Usage of Best High Bond Strength AB Epoxy Glue
1).Clean the bonding surface, if the adhesive surface is too smooth must first do a rough treatment.
2).A, B two parts according to 1:1 ratio to completely uniform mixing.
3).With steel scraper or other tools, will be a mixture of adhesive coated in sizing.
Technical data:
| Model No. |
Appearance |
Color |
Viscosity25ºC |
Gravity25ºC |
Condition of cure |
| CEX--81201 |
Paste |
Black,White |
40000~50000 |
1.52g/3 |
120ºC 60min |
| Characteristics after curing |
|
|
|
|
|
|
|
|
|
|
| Model No. |
Hardness(Shore D) |
Distortion temperatureºC |
Tensile strength(kg/mm2) |
Coefficient of linear expansioncm/cm/ºC |
Coefficient of heat release |
Water absorption %24h |
Delectric constant(1KH)Z |
Volume resistance 25ºC |
Surface resistance25ºC |
Withstand voltage 25ºCKv/mm |
| cm2/ºC/cm |
Ohm-cm |
Ohm |
| CEX--81201 |
85 |
160 |
220 |
<5.38×10-5 |
4×10-3 |
<0.05 |
3.8~4.2 |
1.4×1015 |
2.2× 1014 |
20~23 |
Thanks for visiting. Any questions, please feel free to contact us.
