High Quality Electronic Adhesive RTV Silicone Sealant
1. Hight quality
2. Superior bond strength
3. Easy to use
4. Quick dry
What to bond:
High performance epoxy adhesive is the adhesive for households and industries. Suitable for repairs and welds. Makes superior bond strength. Bonds to all metal, plastic, rubber, wood, ceramic, glass and concrete. Resistant to acid, alkali, oil, solvent and chemicals. Non-flammable, non-shrinking and waterproof. Makes metallic grey finish. Can be filled, grinded and drilled.
Application:
1.Surface to be repaired should be clean, dry and free of oil.
2.Pierce ends of tubes using cap. Squeeze equal amount of hardener and resin from each tube and mix thoroughly until a uniform color is achieved. Mix only what you can use immediately.
3.Apply to surface to be repaired. Remove excess epoxy.
4.Sets in 3-5 minutes.
Cautions:
1. Mix thoroughly; Apply to at once after mixing, less amount every time.
2. Cover tightly after using, do not confuse the caps.
3. Wash off the additional glue by alcohol before its solidifying.
4. Avoid eyes and skin contact.
5. Keep out of reach of children, guard against to enter into mouth.
| Before curing |
Project |
CEX3020 |
| |
Appearance |
Black,Gray,White(A)/(B) |
| |
|
|
| |
|
3020 |
| |
Part A Viscosity (cps,25ºC) |
1520 |
| |
Part B Viscosity (cps,25ºC) |
1750 |
| Operating performance |
Mixture ratio |
1:1 |
| |
A:B |
|
| |
Mixture viscosity(cps) |
1580 |
| |
Surface drying time (min,25ºC) |
120-180 |
| |
Operating time(min,25ºC) |
≤60 |
| |
Curing time (min,25ºC) |
360-600 |
| |
Curing time(min,80ºC) |
30 |
| After curing |
Hardness(shore A) |
35-45 |
| |
Thermal conductivity [W(m·K)] |
≥0.8 |
| |
Dielectric strength(kV/mm) |
≥27 |
| |
Dielectric strength(1.2MHz) |
3.0~3.3 |
| |
Volume resistance(Ω·cm) |
≥1.0×1016 |
| |
Thermal expansion coefficient [m/(m·K)] |
≤2.2×10-4 |
Thanks for visiting. Any questions, please feel free to contact us!
