This equipment by grinding, sand blasting system, cleaning system, dry system, exhaust system, transmission system, electrical control system, air system, etc. Mainly is suitable for the long strip parts sandblasting processing.

The main technical data

 

1.4.1 electrical equipment

 

1) grinding fluid pump motor: 11 kw and 2840 r/min, 3 n ~, 50 hz, 380 v, IP44.

2) clean the pump motor: 4 kw, 2840 r/min, 3 n ~, 50 hz, 380 v, IP44. (abbreviated)

3) lighting: 2 x 20 wx2 fluorescent lamps, ~ 220 v.

 

4) drive motor: 0.55 kw x3, 10 r/min, 3 n ~, 50 hz, 380 v, IP44

5) heating fan: 1.5 kw x1, 10 r/min, 3 n ~, 50 hz, 380 v, IP44

6) heater: 6 kw x 1 50 hz, 380 v, IP44

7) control circuit voltage: ~, 24 v.

8) total power: about 25 kw.

 

1.4.2 storage box grinding fluid capacity: 230 l.

 

1.4.3 abrasive:

 

1) categories: it is recommended to use abrasive corundum class, also allows the use of other abrasives;

2) size: # ~ 240 # 46;

3) usage: 40 kg (see instructions).

 

1.4.4 processing range:

 

1) width: 3-50 mm; Height: 3-25

The maximum load for 2) : 50 kg uniform.

 

1.4.5 gun:

 

1) quantity: 6 the PQ1 spray gun;

2) nozzle diameter: Φ 12 mm;

3) the gas nozzle diameter: Φ 4 mm;

4) work pressure (after startup of the compressed air gage pressure) : 0.4 ~ 0.6 MPa.

5) single gun: gas consumption is about 0.7 ~ 1.4 M3 / min.

 

1.4.6 machine: the gas consumption of about 8 m3 / min.

 

1.4.7 pipeline connector size: 25 mm Ф (hose) or G1 \"(hard).

 

1.4.8 delivery hose connector size: Ф 13 mm (hose) or G1/2 \"(hard).

 

1.4.9 covers the size (length x width x height) : 6500 * 3500 * 2080 mm.

 

1.4.10 weight: 1200 kg.

Packing weight: host package weighs about 1350 kg