This device can be used in outdoor, it for cleaning, removal of oxide layer and the burr had a very good effect, its main characteristic is no dust, environmental protection, water sand, mobile, portable, and spray gun with remote control switch, the operator can easily to sandblast artifacts.

Oad ￠610 (diameter) x 1700 mm (high)

Sand tank volume of 0.15 m3

Hold sand water volume of 0.1 m3

Sand sand water weight: 80 kg of water: 80 kg

The weight of about 380 kg net

Sand blasting hose diameter ￠25 mm x 10 meters (long) special sand blasting hose

The manual spray gun 1 boron carbide spray gun

￠8 mm nozzle diameter

The service life of the nozzle to 650 hours

Single speed gun cleaning scale: 8 m2 / h paint: 24 m2 / h

Processing level sa2.5

Air pressure, displacement of 0.8 ~ 0.8 MPa, acuity 3 m3 / min

Work stress after startup of relief valve pressure table 0.5 ~ 0.8 MPa

Single gun gas consumption of about 3 m3 / min (according to air pressure)

￠pipeline connector size 25 mm (hose) or G1 \"(hard tube)

Types of abrasive is recommended to use abrasive corundum abrasives, glass beads

Abrasive particle size 16 # ~ 150 #

The quantity of sand：2kg/min