HK-1001B Fully automatic open cup flash point tester (Cleveland open cup method)

 The flash point is one measure of the tendency of the test specimen to form a flammable mixture with air under controlled laboratory conditions. It is only one of a number of properties that should be considered in assessing the overall flammability hazard of a material. Flash point is used in shipping and safety regulations to define flammable and combustible materials. Consult the particular regulation involved for precise definitions of these classifications.

Overview

HK-1001B Fully automatic open cup flash point tester (Cleveland open cup method) , conforming to ASTM D92 test standard, is applicable to all petroleum products with flash points above 79°C (175°F) and below 400°C (752°F) except fuel oils.

Features

1 Highly automatic design, the instrument automatically complete control, sweeping ignition, flash                examination, alarming, result calculation and etc. it can complete all the experiment procedures with          unwatched tester. Consist of lifting device, electrical heater, standard oil cup, ignition device, flame            application device, gas circuit and etc.

2 The instrument configures right and left two sides ignition plug, which ensures that no flame would            extinguish during the applicator sweeping detection progress, save energy safely.

3 The instrument configures high precision needle-type valve to control gas resource, can precisely ensure    testing-required flame’s diameter, also equips with standard flame, can compare with the testing flame at any time.

4 The instrument equips with rapid detection flash point test mode, only press one button, user can enter into unknown flash point rapid test.

5 The instrument’s automatic audible and visual alarm system will alert user as soon as finishing the              experiment, also the instrument equips with double fan drives cooling device, can shorten experimental period.

6 In order to inquire the record easily. The instrument equips with thermal printer, which can store large capacity measuring results.

7 The instrument got decent and reasonable structure, easy to operate and friendly to environment.

8 All the gas source pipes are made of stainless steel, which made it safe and reliable.

9 The apparatus is equipped with a big friendly touch operation screen and also can be interfaced with an external PC for operation and method updates. Multiple indicators are convenient for user to find the fault in the test

10 The Pt-100 RTD probe is also equipped to duplicate the response time of a mercury-in-glass thermometer

Main technical parameter

 
1,Rated voltage: AC220V±10% 50HZ
2,Power:700W
3,Operating model: LCD touched screen
4,Ignition way: Automatic digital ignition
5,Ignition gas supply: Pipelined gas and LPG (pressure≤10Kpa)
6,Printer: Thermo sensitive printer
7,Cooling way: Compelling cooling by double fan
8,Testing method: High precision flame ionization test
9,Ambient requirement: temperature:15~30°C humidity: ≤85%