HK-1002 Electronic Closed Flash Point Meter

Introduction

HK-1002 Electronic Closed Flash Point Meter (Pensky-Martin  method) (Basic  model)conforms to GB/T261 & ASTM D93 standards. It is used to test the flash point of fuel oil,lubricating oil and so on under certain experimental condition.

Structure

1. Upper cover with a standard fireball comparator, easy  to  operate. 

2. Heating with stepless voltage regulator, heating-rate is even. 
3. Stainless steel heater, safe and reliable. 
4. Electrical motor to agitate oil sample makes the temperature of oil sample up equability. 
5. The instrument is designed rationally, has attractive appearance and easy to operate. 

Technical parameters

1. Rated voltage: AC220V±10% 50Hz. 
2. Temperature range: 40~300°C 
3. Heating power: 0~1000W    (Continuously adjustable). 
4. stirring way: Motor stirrer, 105r/min. 
5. Ignition gas: Pipeline coal gas, Liquid gas, and gas pressure less than 10Kpa. 
6. Ignition way: manual type. 
7. Ambient temperature: 20~30°C   Humidity≤85%