EM card reader ID card reader proximity card reader

Model:	JAT HM6101/02
Brand:	access-controller
Origin:	Made In China
Category:	Services / Trade Agent / Security Product Agents
Label:	EM card reader , ID card reader , EM keypad reader
Price:	-
Min. Order:	-

Inquire Now

Product Description

HM6101 EM reader

Introduction

HM6101 is EM ID card or EM compatible Proximity card reader. It reads the EM card ID card identification number and transmits it to the access control system using the common Wiegand 26 bit interface

Model Name: HM6101

Wiring:

Red: Power 9-15V
Black: Power ground
Green: Wiegand output D0
White: Wiegand output D1
Brown: Green LED control
Blue: Buzzer

Specification

Full potting for outdoor use, waterproof
Support card	EM ID card or EM compatible RFID card
Power requirements	5-16VDC at 150 mA, A linear regulator is recommended
interface	Wiegand
Reader range	8-15 cm
Frequency	125KHz
Operation temperature	-30 C to +60 C
operation humidity	5%-95% relative humidity non-condensing
Audio/Visual Indication	Green & Red and Buzzer signal output
Dimension	43×102×16( mm )
cable length	250mm
Weight	80gram

LED/Buzzer function description

LED function: The LED color is normally RED. It starts with 1 green flash on power up the reader and remains RED. When a EM ID card or EM compatible RFID proximity card is presented to the reader, The LED will momentarily flash green, this indicates that the proximity card was read properly by the reader. When the LED control signal is activated by access controller, the LED changes to green. The LED control signal is provided by the panel to control the reader LED state.

Beeper Function: Power up the reader, the beeper will activate 1 time. When a EM format or EM compatible RFID proximity card is presented to the reader, a short beep will be emitted. This indicates that the card was read properly by the reader.

Buzzer control line: when it is activated by access controller, buzzer will sound continually till the line is released to high by access controller or access control panel.

Green LED control line: when it is activated by access controller, Green LED will be on till the line is released to high by access controller or access control panel