HID OEM reader module
Introduction
HM08 is samll size , compatible HID card reader module. It reads all standard HID proximity card, including HID 1386 , HID 1326 card, HID proxII card and also HID fob keytag. Once the card is detected by module, data will be sent to access control host by via Wiegand interface.
Specification
| Size |
20*32mm, 6 mm high |
| Power input |
5V at 30 mA |
| Output interface |
Wiegand |
| support card |
HID proximity card |
| Reading distance |
Min. 5CM with standard antenna |
| Frequency |
125KHz |
| Operation temperature |
-30 C to +60 C |
| operation humidity |
5%-95% relative humidity non-condensing |
| Audio/Visual Indication |
N/A |
| Antenna |
With standard antenna |
| Weight |
15 gram |
Application
As a small size module to be soldered onto different controller or card reader main board to add reading HID card functions. When a RFID proximity card is presented to the reader, The LED will momentarily flash green, this indicates that the card was read properly by the reader.
