CE core veneer composer (Server Motor) for plywood working machine advantages:

 

One operator required, no overlap or open joint, no break

Taiwan process

Whole stamping structure for veneer composer
Save 70% core finishing
Save 80% assembling work
Save 50% putty working

 

The veneer which is widely used for the production of the three-ply board, sandwich panel, LVL, floor substrate, furniture panel, building film face board, container board , melamine ecological, block board and etc. this changes the traditional manual decking technology and makes the plywood decking unitized and automatic.

 

 

 

 

Features and advantages:

1.    PLCServer Motor control. Unmanned operation, automatic process, labor saving
2.    Precise thickness checking, thickness balance, minimum polishing
3.    Servo drive, effective overlap and joint control.
4.    Highly strengthened thread, improve product horizontal tensile force and flexibility, no break.
5.    Supported by the Japan SMC, Taiwan Taida, Mitsubishi and other international top level brands.

 

Working principle and process

The core veneers (1.0-4.0mm thickness panels) after drying may have different length and thickness, and the shapes may get irregular, this machine can detect the width, thickness, cavities of the core veneer d have them trimmed, glued, spliced, cut to length and stacked automatically. With this machine, customized veneer with different sizes can be spliced.

 

Parameters

 

Core veneer composer machine
Model	CXCT-4C(Taiwan process)
Brand	Taiwan Changxing
Working veneer width	600-1270 mm   (3-4ft)
Cutting veneer length	600-2560 mm   (4ft, 5ft, 6ft, 7ft, 8ft)
Working veneer thickness	1.0-4.0 mm
Length of knife	1350 mm
Veneer thickness and hole detecting	0-25 points(as required)
Thread ,Glue point	10 points
Electric power requirement	22KW
Veneer Feeding speed	32m/min
Output	6-7sheet /min(4x8ft),                      Actually output:300sheet/hour
Area occupied (W x L)	3200X12000mm
Main machine	3800X2300X2200mm
Push veneer system	4000X1900X2300mm
Weight	7000kgs
Shipping measurement	20cbm
Warranty	One year
Life time	20years

 

 

 

 

Optional accessories

1. Veneer feeding machine

2. Veneer stacking machine   2.7KWa air compressor with 3.7kw motor                                                       

3.Highly strengthened thread and hot melt glue