The Saimo model 6105 is the premium weigh feeder controller. This controller is based on 32-bit microprocessor electronics with a 320X240 LCD display.

Features

• Digital electronics
      Provides accurate and drift-free performance
• Auto Zero
      Automatically initiates a new zero through one easy push button operation.
• Auto Span
      Offers several span calibration modes, such as static weights, test chain, electronic calibration and
      material calibration.
• Auto Zero Tracking
      Auto-zero function activates whenever the conveyor belt runs empty for a preset time.
• Programmable Features
      Digital inputs and outputs can be programmed to fit individual requirements.
• Filtering Selection
      Filtering time can be adjusted for specific applications.
• Zero Dead Band
      Minor flowrate variations can be reduced by setting a zero dead band.
• Speed Input Selection
      Two kinds of speed input methods are available: internal (simulated) and external
• Password Protection
      Provides data security during operator access.
• Self-diagnostics
      Fast and accurate self-diagnostics can be done for multi-channel loadcells
• Enclosure
      Field Mount
      Outline dimensions: 296mm x 399mm x 132mm
      Mounting hole dimensions: 280mm x 247mm
      Panel mount:
      Outline dimensions: 299mm x 154mm x 203mm
      Opening dimensions: 142mm x 287mm
• Temperature
      Operating: -10-50℃
      Storage: -40-70℃
• Power Requirements
      110-120 - 220-240VAC, 50Hz
• Digital Inputs/Outputs
      Three (3) programmable digital inputs allow the controller to accept switching value inputs and/or
       instructions from various equipments.
      Four (4) programmable digital outputs (relay,voltage free contacts) allow the integrator to provide
       various data indication and/or activate ancillary equipments.
• Speed Input
      Single (1) speed pulse input from speed sensor.
• Analog Inputs/Outputs
      Input: Millivolt weight signals from toad cell(s)
      Outputs: One (1) standard current output 0-20mA or 4-20mA for flowrate signal
• Control
      PID regulated control output
• Communications
      RS232 or RS485 communication interface, PROFIBUS field bus (For additional inputs/outputs gapctose or
       other communication interfaces please contact Saimo)