Plywood may be made from hardwoods, softwoods, or a combination of the two. Some common hardwoods include ash, maple, mahogany, oak, and teak. The most common softwood used to make plywood in the United States is Douglas fir, although several varieties of pine, cedar, spruce, and redwood are also used.

Plywood is made with an odd number of layers, making it tough to bend. The angle at which the veneer grains are laid against each other may be varied from 90 degrees. Each veneer can be laid at a 45 or 30 degree angle to the next one, increasing the plywood`s strength in every direction. This cross lamination increases the panel shear of plywood, important in bracing panels and fabricated beams.

Plywood Specifications :

* size : 1220 * 2440 mm 1220 * 3000 mm 915 * 1830 mm 1250 * 2500 mm  ACCORDING REQUIREMENT 
* Thickness : 2.0-60 mm 
* Gluing : MR, E2, E1, E0, MELAMINE, WBP 
* Core : Poplar,Hardwood combination etc
* Moisture : below 14 % 
* Face and  Back :   Okoume,  Bintangor, Pine,  Birch, Poplar, Cedar, Teak, Maple,Cherry, Birch,White Oak, Red Oak,Sapeli etc                        

*Application: Furniture, decoration, door, flooring, wall panel , etc.        

*Quality:

1. MoistureContent: 9%-16%

2.Features:Normal,moisture-proof, water-proof, environmentally friendly.

3.Application: Furniture, Decorative materials, Construction, etc.

4.Finishing: Sanding both sides or sanding one side

One time hot press or two times hot press 

*Feature :                                                                                                              

1.Surface is smooth, exquisite

2.Strong screw holding

3.Moisture-proof 

4.Environmental friendly 

5.Low formaldehyde releasing