Particle boards can either be bought bare or it can be covered with thin sheets of veneer or a plastic laminate, these two materials give the board a solid timber look and feel while costing marginally less.

______________________________________Introduction

1. Introduction

Particle board, also known as particleboard and chipboard, is an engineered wood product manufactured from wood chips, sawmill shavings, or even sawdust, and a synthetic resin or other suitable binder, which is pressed and extruded. Oriented strand board, also known as flakeboard, waferboard, or chipboard, is similar but uses machined wood flakes offering more strength. All of these are composite materials[1] that belong to the spectrum of fiberboard products.

______________________________________Specification

* size :  1220 x 2440 mm  1830 * 2440 mm or as clients requirement

* Thickness :  9-30 mm.

* Face/Back :  plain, melamine faced or veneer faced

* Core Material : poplar etc 

* Density :  600-650 kgs / cbm ,  650-700 kg / M3 

* Moisture :  less than 12 %

* Treatment : melamine facing , veneering  etc