I.Material Introduction

Recalon MC nylon, which is produced by the European advanced original production equipment, raw materials and technology, from the caprolactam by base catalysis bulk polymerization, the polymerization forming synchronization is complete. Process mature products with high performance, energy-saving, pollution-free characteristics. Recalon MC Nylon is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It’s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40 to 110 . 

II.Grades include:
1. Recalon  oil-filled MC Nylon
A special formulation of Liquid Lubricant encapsulated during manufacture, provides for true lubrication at the bearing surface. Oil-Filled Nylon is offered for applications where maintenance lubrication is difficult or impossible. As well, nylon specially formulated OIL, limits moisture adsorption, making Oil-Filled Nylon an ideal bearing material for submerged or critical tolerance applications.

2. Recalon MoS2 filled nylon, grey-black
Recalon MoS2 NYLON was filled by molybdenum disulfide, it will not affect high impact and fatigue resistance of the unmodified cast nylon while increasing its carrying capacity and wear resistance. It is very widely used to make gears , bearings, star wheels and shaft sleeves.

3. Recalon high impact Nylon,Natural

4. Recalon Glass fiber nylon, black

5. Recalon Antistatic nylon, black

6. Recalon flame retardant nylon, black

Note.Remarks
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.

III.Characteristic

Advantages:
1. High strength and stiffness 
2.High impact and notch impact strength 
3. High heat deflection temperature
4.Good at dampening 
5.Good abrasion resistance
6.Low coefficient of friction
7.Good chemical stability against organic solvents and fuels
8.Excellent electrical properties, ease of printing and dyeing
9.Food safe, noise reduction

Disadvantages:
1.Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
♦ Poor acidproof ability, can’t dye with acid or touch overmuch acid
♦ Poor lightfastness, poor endurance in pollution

IV.Application

1. Chemical Machinery
2. The gears and parts of corrosion equipment.
3. Wearing parts, transmission structure parts
4. Home appliance parts
5.Automotive parts
6. The mechanical parts of screw rod
7. Chemical Equipment
8. Gears, bearings, star wheels