I.Material Introduction

Define and purpose
This laminated product is formed through heat pressing after electric industry alkali glass cloth dips into the phenolic resin. It has high mechanic and dielectric performance, and applicable as insulation structural components for electromechanical/electrical equipment, as well as used under damp environmental conditions and transformer oil. 

Technical requirement for surface
Appearance: The surface should be smooth. Layers, arris and bubbles are not allowed. Tiny corrugation and trimming signs are allowed. Little impurity that will not affect its voltage resistance is allowed, such as irregular color, scratch and glue marks. Tiny corrugation in the inner wall is allowed. The end shall be cut tidy. The tubes with over 13mm wall thickness are allowed to have tiny flaws on the end. 

II.Application

Chemical machine parts , general machine parts and gear ,and pads, base, baffle etc.. 
Generator ,transformer, fixture, inverter, motor and electric insulation component.
Worked as the insulation structural parts of the electrical equipment, work under dry conditions and transformer oil environment.