Wholesell H Snap Style Polycarbonate Plastic Profile PC Connection Accessory

Model:	APPA-01
Brand:	Amuse
Origin:	Made In China
Category:	Construction & Decoration / Other Construction Materials
Label:	PolycarbonateProfile , PC Connecter , PC Accessories
Price:	US $4.9 / kgs
Min. Order:	3000 kgs

Inquire Now

Product Description

Welcome to contact us Amuse Plastic for more items and details!

Wholesell H U Snap Style Polycarbonate Plastic PC Connection Accessory

Product Features:

1. Lightness
2. Graceful appearance
3. The same with PC sheet on physical property
4. Good seal ability
5. Easy installation
6. Temperature resitance range: -40 to 120°c.
7. Weather proof
8. Flame resistance: B1 grade
9. Environment friendly

Polycarbonate Characteristics:

No.	Characteristics	Unit	Data
1	Impact Strength	J/m	850
2	Light Transmission	%	85
3	Specific Gravity	g/cm3	1.2
4	Coefficient of Thermal	mm/m °c	0.065
5	Service Temperature	°c	-40 to +120
6	Heat Conductivity	W/m2°c	2.3-3.9
7	Tensile Strength	N/mm2	>60
8	Flexural Strength	N/mm2	100
9	Modulus of Elasticity	MPa	2400
10	Tensile Stress at Break	MPa	>65
11	Elongation at Break	%	100
12	Specific Heat	kj/Kgk	1.17
13	Heat Deflection Temperature	°c	140
14	Effect of Soundproof	dB	3-4

PC Profile Details:

Suitable thickness
PC-U: 4mm/6mm, 8mm/10mm
PC-H: 4mm/6mm, 8mm/10mm
PC-UP & DOWN SNAP CONNECTER: 4mm-10mm

Advantage
Same material as the sheets, making the construction look more beautiful & harmony.

Application
To connect polycarbonate sheets together and prevent dust inside the sheets.

Professional PC Accessories: PC "H" connecter, PC "U" edge, PC snap (PC cap), ....

Loading:

PC Sheets Storage:
Stored on flat surfaces or wooden bearers with 100mm minimum bearing surface, placed at centre not exceeding 1m.
Make sure the place where you stored is dry, shaded and well ventilated area.
Use an opaque cover (not under flexible PVC coverings), tightly secured, protecting from wind, rain and sun.
Don't store under direct sunlight or without shelter from rain. Indoors torage is always preferable.

PC Sheets Installation:

Step 1: Use screws to attach the base connecting profiles to the roof beams. Make sure the screws not bend, tear or exert excessive pressure on the profile.

Step 2: Place the sheet on top of the base profile support edges, with the side covered by the printed protective film facing upwards.

Step 3: Slide the base under the sheet and attach it to the beam.

Step 4: Place the side spacer profile onto the roof beam and attach the cap to the base by hammering into place with a rubber mallet.

Kindly Remark:

1. As expandable, the drilling diameter must be 1.5 times than that of the bolt.

2. Do not use gaskets made of PVC.

3. PC Sheets can't be installed too tight because there will be thermal expansion and contraction which will adversely affect the installation.