Functions

This instrument is indicated for the cut and coagulation surgery of tissues in surgeries

 

Specifications

Voltage:AC 220V 50Hz

Maximum output power

Mode	Rated output power
ECO-800A	350W
ECO-800B I	300W
ECO-800B II	200W
ECO-800B III	100W

Working frequency :512 kHz/300kHz 

CF type equipment

Input power:≤600VA+10%

Unit size: 40cm * 42cm * 16cm

Weight: 18kgs

 

 

Characteristics

.Cut output power:0-350W, coagulation output power: 0-200W

.Six cut modes : High Power cut (ECO-8000A), Pure,Blend1,Blend2, Blend3, Endo cut

.Four coagulation Modes: Forced,Soft, Spray, Bipolar

.Monopolar and Bipolar auto-exchange

.Peak Power System(PPS) : Auto adjust power

.Spray coagulation is good for superficial coagulation.

.Wider Impedance Recognition(50-1800Ω), meeting all kinds of operation environment

.Neutral electrode Safety system(NESSY), continuously monitor neutral electrode

.Less smoke under power.

ENDO-CUT available to work with different coagulation mode

 

.Application

 

General surgery, orthopedics, gynecologic, urological,cardiac surgery, anus intestines, tumor surgery department and etc.

Endoscopic surgery under endoscope, celoscope and cystoscope;

Neurosurgery, microsurgery, E.N.T and Plastic surgery department under low power

 

.Model parameters

Mode	Matching Impedance	Basic Parameters	Product Model
			ECO-800A	ECO-800BI/D	ECO-800BII/D	ECO-800BIII
Cut
High Power	400Ω	Power	350W	300W	/	/
		Basic frequency	300KHZ	300KHZ
Pure		Power	300W	250 W	200W	100 W
		Basic frequency	300KHZ	300 KHZ	300 KHZ	300 KHZ
Blend1		Power	150W	150 W	150 W	80W
		Basic frequency	512KHZ	512 KHZ	512 KHZ	300 KHZ
Blend2		Power	120W	120 W	120 W	60W
		Basic frequency	512KHZ	512 KHZ	512 KHZ	300 KHZ
Blend3		Power	80W	80 W	80 W	/
		Basic frequency	512 KHZ	512 KHZ	512 KHZ
Endo		Power	120W	120	80 W	/
		Basic frequency	512 KHZ	512	512 KHZ
Bipolar cut	250Ω	Power	350W	/	/	/
		Basic frequency	100KHZ
Coagulation
Soft	400Ω	Power	150W	150 W	150 W	/
		Basic frequency	512KHZ	512 KHZ	512 KHZ
Forced		Power	120W	120 W	120 W	100 W
		Basic frequency	512KHZ	512 KHZ	512 KHZ	300 KHZ
Spray		Power	100W	100 W	100 W	/
		Basic frequency	512KHZ	512 KHZ	512 KHZ
Bipolar coa.	50Ω	Power	80W	80W	80 W	80 W
		Basic frequency	300KHZ	300KHZ	300 KHZ	300 KHZ

 

Effect for cutting modes:

1- High cut: the model of 300W and above the energy , the model for underwater vaporization electric resection, can achieve the desired cutting effect.

 

2- Pure cut: similar to the effect of scalpel cutting , apply to fine and non-invasive cutting of any tissues.

 

3- Blend 1 cut : cutting along with mild clotting effect. For orthopedic surgery, flap separation, large blood vessels around the tissue separation.

 

4- Blend 2 cut : cutting along with moderate coagulation. Applicable to general, chest, laparoscopic cut, bleeding and other surgery.

 

5- Blend 3 cut: cutting along with stronger coagulation effect than the blend 2 cut . Applicable to the demolition of the breast, general surgery, orthopedics and so on.

 

6-  ENDO cut: in the endoscopic conditions, the operator couldn’t directly control the operation process and set up a program called "ENDO CUT", refer to the actual clinical needs, flexible to set the output power of electric cut and coagulation, to achieve a more ideal surgical results.

 

7- Bipolar cut: unique in the saline , the cutting effect is caused by the Kinetic Energy Ion generated in Bipolar Vaporization, which can achieve the effect of rapid removal of tissue at low temperature, to avoid the occurrence of congestive edema and water poisoning.

 

8-Soft coagulation: Touched hemostasis, coagulation,are conducive to the wound healing after surgery. Suitable for rapid touched coagulation in luminal surgery and other fine tissue surgeries.

 

9-Forced coagulation: touched hemostasis, coagulation, Electron-coagulation effect is stronger, usually called point coagulation.

 

10-Spray coagulation: surgical electrodes and biological tissue can be without touching , apply to stop bleeding of a large area . The Electron-coagulation effect is strong, usually called surface coagulation (working with argon gas controller can produce argon ions for coagulation).

 

11-Bipolar coagulation: for neurosurgery or ordinary bipolar coagulation surgery. To achieve the tissues or vascular coagulation function in the middle two tweezers.

 

12-Bipolar Electro-coagulation: unique in the saline,the electro-coagulation effect is caused by the Kinetic Energy Ion generated in Bipolar Vaporization,

which can achieve the effect of rapid hemostasis and Coagulation at low temperature, to avoid the occurrence of congestive edema and water poisoning.