& nbsp; MC times booster

[Product Benefits]
1. Precision times the pressure boost design, easy to operate, suitable for heavy cutting use.

[Note]
(1) When clamping the workpiece to be appropriate, can only use the hand plate tight handle, not with other tools afterburner.
(2) strong operation, should try to force the fixed jaw.
(3) Do not hit the job on the jaw and smooth plane.
(4) on the screw, nut and other activities should be regularly cleaned surface, lubrication, to prevent rust.
(5) Before using the slider slide down, clamp, hand shake the hand, the vise force hydraulic cylinder inside the exhaust (each with a section Time, it is recommended to operate this time), and then push the slider up, put the handle on the oil pressure, generally forward 2 laps on it. If you are handling thin pieces or do not need oil pressure, slide the slider down.

MC angle solid / Kennei precision hydraulic vise: high power type full range of precision hydraulic vise, for vertical and horizontal integrated cutting Center, ordinary milling machine, rocker drilling, planer, boring machine, and other mechanical processing.

& nbsp; MC times booster

[Product Benefits]

1 MC times the pressurized vise, apply to vertical and horizontal integrated cutting machine FMS system to do heavy cutting.

2. Grips light, efficient and effort, can reduce the labor intensity of employees.

The use of semi-spherical angle under the pressure structure, can eliminate the tiger's mouth floating and the workpiece tilt.

(PCD60 ~ 60kgs / mm). The use of high tensile strength spherical graphite cast iron (FCD60 ~ 60kgs / mm). (80,000psi) strong tensile strength, not easy to deformation.

5. Seal and other key parts of all German oil control brand-name products.

MC double clamping precision mechanical vise

MC double clamping precision mechanical vise: high power type full precision vise, for vertical and horizontal horizontal machining center, ordinary milling machine, rocker drilling, planer, boring machine, and other mechanical processing.

[Product Benefits]

1. Double clamping mechanism, one side can be freely adjusted with the opening range, can do two different sizes of the workpiece at the same time processing.

2. On both sides of the work is negative or negative 1.5mm can be automatically eliminated, and both sides of the clamping force are kept the same.

3. Bilateral movable jaw design has a corner of the lock mechanism, to prevent the workpiece floating.

4. Strong and powerful material ~ Velvet body using high tensile tensile graphite cast iron (FCD60 ~ 60kgs / mm). (80,000psi) strong tensile strength, high wear resistance, easy to deformation.