Walker's new generation of adsorbent dryers

PRODRY new generation adsorption dryer

Flow 45 SCFM (77 NM after/H) to 77 SCFM (NM after/H), entirely by international standard testing and verification, PRODRY multi. Voltage can be widely used in many industries, now you can upgrade to a higher level of dew point, greatly improve the efficiency of drying, no matter how tough your application requirements, PRODRY can make the best performance, perfect with dry compressed air solutions.

1, increased dew-point sensor management

The drying efficiency is as high as 81 percent (installation DMC controller), advanced desiccant mixture filling, optimizing dew-point performance.

2, the performance

Add box design at the top to improve the speed and efficiency of processing;

Built-in intelligent LED controller to provide standards for energy management;

Compact modular design, built-in hook, plated aluminum profile, providing complete corrosion protection;

Multi-directional takeover, flexible installation;

External installation silencer, reducing replacement time;

Unique cleaning plug, select the appropriate aperture size, adapt to the changing pressure demand (in the patent application);

Add pressure gauge for drying tower.Accurate and accurate diagnosis of pressure, easy to read;

Optional DMC controller, advanced dew point management and energy saving.

 

All new walker filtering PRODRY dryer model features:

Major design changes: longer drying time and energy storage can greatly reduce the risk of uneven drying and not drying.

The operation efficiency and energy saving are based on the choice and installation of DMC controller

Operation flow of 360 SCFM (612 nm after/h) in 7 Bar (100 psig) inlet pressure and 35 ° C (95 ° F) inlet temperature, under 90% load of the machine can run continuously for 6000 hours.

The optional DMC controller

* said flow inlet pressure of 7 Bar (100 psig), reference to 20 ° C, 1 (Bar), 0% of the water vapor pressure.Apply appropriate correction factors, operating terms and dew point requirements in other pressure streams.

* dew point management control state: "DMC" when asked about the controller type, you need to set your choice based on your requirements.

* technology and selection parameters:

* technical remarks:

1, models from PD0046 to D0360 XA WALKER company recommended level (0.01 microns) for the pre-filter, installed at the upstream, to a level RXA (0.01 microns) of dust filter installed downstream of drying machine, used for filter particulate impurities.

2. You must install a soda separator.If a large amount of liquid water into the absorption dryer, it can lead to desiccant thermal expansion, resulting in dryer differential pressure rise, lead to worse export dew point, at the same time can also lead to potential drying machine fault.

3. Supporting instructions.The application of all dryers must be equipped with a two-step WALKER filter.Please contact your latest sales team to confirm the details and recommend the size of the filter based on the air flow you need.

Dew point instructions.The dew point management control (DMC) option includes the number dew point display and dew point sensor.They provide stable dew point control based on outlet dew point.

5. The fixed dimensions of the floor are as shown in the left image.

6. PRODRY scale and further information service tools and accessories, please refer to the PRODRY price guide or manual.