Stator Coil Pre-forming Machine is driven by hydraulic system; PLC programming; tooling expansion slice
makes the first coil and inter-phase insulation paper in slot adjacent,
leaving enough space for second insertion and ensure the quality of
successive coil insertion; apply to multi-layer stator winding
insertion.



Technical parameter:






Stator I.D




30~100mm






Max stator O.D




160mm






Thickness of stator lamination




15~100mm






Displacement of oil pump




20F






Power supply




380V/50/60Hz






Machine productivity




around 1500pcs/8 hours






Weight




800KG






Dimension




1200mm700mm2200mm














 


 


 


 





Machine main function and characteristic


This machine adopts whole hydraulic system and PCL program.


This machine can adjust the forming stack length by changing washer.


Form the OD, and ID of the stator core coil without forming hang over to facilitate operator to put phase isolator.


After forming, there is no copper wire enamel broken or wire snape


Changing a new tooling is easy and convenient.


Both
slot paper and wedge should not be damaged or turned over. The stator
should not be deformation or stator lamination should not be upward.
There is no wire enamel broken.


Production capacity 15s/set (exclude loading/unloading time)


Primary qualification rate 99%, after rework, the rate 99.9%


This machine adopts safety grating protection system. Operator need to stand when operating.


Machine adopts two hands simultaneously start button to ensure safety.








http://www.nide-auto.com