Three-phase dc pump DC50D

Three-phase dc pump DC50D

Date:2014/08/01 Views:2104

 

DC50D Series

Product Appearance

          T sub-series(2phase)                 S sub-series(3phase)                A sub-series(3phase)

Specifications

 

NO.	Item	Specs
1	Dimension and weight	103.5mmx107mmx64mm;480g
2	External diameter of outlet	20mm
3	External diameter of inlet	20mm
4	Driving mechanism	Brushless, magnetic separation
5	Material of pump shell	ABS,PES/SPS/PPS/PA66+30%GF (Optional)
6	Condition of use	Can continuously work, submersible or land use (not self-priming)
7	Suitable medium	Water, oil, or normal acid/ alkaline liquids (Pre-test needed for special liquid)
8	Max working temperature	60℃(for T sub-series) or 100℃(for S/A sub-series)
9	Power consumption	2.5W~45.6W(for T sub-series) or 2.5W~86.4W(for S/A sub-series)
10	Rated voltage	12Vdc or 24Vdc
11	Working voltage range	5Vdc ~ 12Vdc or 5Vdc ~ 24Vdc
12	Max load current	2.1A (for T sub-series) or 3.8A(for S/A sub-series)
13	Max horizontal flow rate	36L/MIN(for T sub-series) or 41L/MIN(for S/A sub-series)
14	Max static lift	4M(for T sub-series) or 6.5M(for S/A sub-series)
15	Noise class	IP68(suitable for submersible installation)
16	Waterproof class	Can be more than 30,000hrs
17	Life span	Can be suitable solar panel, batteries, source adapter or other power module
18	Power supply	Water protection, dry-run protection, stall protection, stuck protection (functions are optional for customization)
19	Protection function	Speed adjustable by PWM signal, 0~5V analog signal or potentiometer (functions are optional for customization)
20	Power regulation function	IP68(suitable for submersible installation)

 

Features

• Small size, high efficiency, maintenance-free, low consumption, strong anti-jamming ability, stable performance
• Brushless with no pollution, adopts high-performance ceramics shaft and high-precision carbon fiber sleeve together (stainless steel shaft optional for reducing cost)long life span
• Stator and control circuits are completely sealed by epoxy resin completely separated with rotor, waterproof, avoided water-leakage problem which long exists in normal DC motor pump products
• Protection functions can be customized such as lock protection, dry-run protection and so on.
• Wide range of working voltage; parameters can be adjustable, e.g. 12VDC pump can have lift of 1m and lift of 3m with the same pump body.
• For A/S sub-series,soft-start without impact,can be directly powered by solar panel; circuit parts and motor parts completely separated, no electronic components inside pump body; pump body is made of high-temperature-resistant material, so pump can continuously work at fluid with high temperature (as high as 100C); have several protection functions, such as impeller&rotor lock protection, polarity reverse-connected protection, over-load protection, over-current protection, etc.
• For A sub-series, it's easy to regulate the power/speed of pump via PWM signal/ 0~5V analog signal/ potentiometer; flow rate & lift can be smoothly adjusted
• Reduced the mortality to 0.05% after long-time study by R&D dep.
• Lift of pumps can be doubled when they are connected in series
• Suitable for submersible installation or land use (should be located below fluid level)
• Offer ODM serve for pump and other controller system

Electrical parameters (only for reference，parameters can be customized for specific requirements)

​

Model No.	Voltage	Max load current	Max static lift	Max flow rate	Power consumption
	V(dc)	A	M	L/H	w
DC50D-1220T	12	1.57	2.00	1300	18.8
DC50D-1220S
DC50D-1220A
DC50D-1230S	12	3.0	3.00	1700	36.0
DC50D-1230A
DC50D-1240S	12	3.8	4.00	2150	45.6
DC50D-1240A
DC50D-2430T	24	1.5	3.00	1700	36.0
DC50D-2430S
DC50D-2430A
DC50D-2440T	24	1.9	4.00	2150	45.6
DC50D-2440S
DC50D-2440A
DC50D-2450S	24	2.9	5.00	2300	69.6
DC50D-2450A
DC50D-2465S	24	3.6	6.50	2450	86.4
DC50D-2465A
NOTE	Information including continuous working time, working temperature and medium is required to be pre-confirmed with professionals; pump cannot work with high temperature or corrosive fluids. When pump is connected into circulation system, load current will be reduced to 70~85% of Max working current (opening outlet current). The head means the Max vertical lifting height of water. The flow is 0L/MIN@max head. The max flow rate means flow rate with no lifting height(according to the curve bellow)

Difference between 2phase & 3phase brushless DC pump

2phase  (T sub-series)

Hall sensor driving, circuit board should be placed inside pump body

3phase (S/A sub-series)

NOTE that 3phase dc is completely different with 3phase AC; 3phase DC means 3 pairs of magnetic polarity & sensor-less, power supply  the same with common DC pump(two wires: positive and negative) Intelligent program-driving, sensor-less, circuit can be put outside of pump body (main factor that pump can be high-temperature resistant) Speed adjustable by PWM, 0~5V signal or potentiometer(optional) Lock protection,reverse-connected protection, over-vol.&over-current protection, over-temperature protection Soft start, no current impact, can be contact directly with solar panel

Diagram of 3phase brushless DC pump connection

 

                      S-Series                                    A-Series
Potentiometer Speed adjusting connection:
Contact the red and black wire to both ends of potentiometer(variable resistor),then contact the yellow wire to the middle of potentiometer,Speed canbe changed by turning the potentiometer. Potentiometer speed adjusting is the same with VR speed adjusting(Remove the potentiometer and contact the speed adjusting wire like VR speed adjusting connection bellow).
PWM(50-800HZ/Amlitude 5V) or VR(0-5V) Speed adjusting connection:
Contact the yellow wire to the control system's speed control signal output interface(PWM or VR) and contact the black wire to the ground lead in the control system.hang the red wire on the air.

Flow rate-lift Curve

Dimensions of pump

 Selection guide

 
  

Model	Voltage (DC)	Current range	Max lift	Max flow	Inlet Dimension	Outlet Dimension	Speed regulation function	Dry-run / Lock protection
DC30A	5~12V	0.1~0.35A	3m	4L/MIN	8mm	8mm	customized	Optional
DC40	6~24V	0.15~1.2A	8m	11L/MIN	14mm	10mm	PWM/0~5V/manual	Optional
DC40A	6~24V	0.15~1.2A	6m	14L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC40C	6~24V	0.15~1.2A	6m	15L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC40F	6~24V	0.15~1.2A	6m	16L/MIN	1/2’’ thread	1/2’’thread	PWM/0~5V/manual	Optional
DC40H	6~24V	0.15~1.2A	11m	7.5L/MIN	11mm	8mm	PWM/0~5V/manual	Optional
DC50	6~24V	0.15~3.8A	7m	44L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50A	6~24V	0.15~3.8A	5m	60L/MIN	27mm	27mm	PWM/0~5V/manual	Optional
DC50B	6~24V	0.15~3.8A	13m	30L/MIN	22mm	22mm	PWM/0~5V/manual	Optional
DC50C	6~24V	0.15~3.8A	6.5m	42L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50D	6~24V	0.15~3.8A	6.5m	42L/MIN	20mm	20mm	PWM/0~5V/manual	Optional
DC50E	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50F	6~24V	0.15~3.8A	15m	25L/MIN	1/2’’ thread	1/2’’ thread	PWM/0~5V/manual	Optional
DC50G	6~24V	0.15~3.8A	18m	10L/MIN	14mm	8mm	PWM/0~5V/manual	Optional
DC50K	6~24V	0.15~3.8A	14m	25L/MIN	14mm	14mm	PWM/0~5V/manual	Optional
DC50W	24V	1~3.8A	wave	28000L/H	Submersible	58mm	Variable Frequency	Optional
DC50Q	24V	1~3.8A	5m	5000 L/H	1’’ thread	1’’ thread	Variable Frequency	Optional
DC60Q	24v	1-5A	5m	10000L/H	1.2’’ thread	1.2’’ thread	Variable Frequency	Optional
Note: 1, lift and flow rate of product can be customized 2, dimension of inlet/outlet, speed adjusting method and control system can be customized. 3,Food grade and mute pump can be customized.