UN1 series resistance to welding machine steel aluminum tube
Machine features:
1. The butt welding is two workpiece end face pressure, using the part of heating resistance heat will contact to the plastic state, and upset pressure quickly or without upsetting pressure maintain welding pressure, only to complete welding method;
2. Compared with flash butt welding, the resistance welding operation is simple, the price is economical and the welding efficiency is high.
3. Smooth joint after welding, small burr;
4. The structure design is exquisite, and the welding of fine and different pieces is easy to adjust, and the special welding machine control circuit is used to ensure the welding quality.
5. The steel aluminum tube is mainly used for welding metal profiles less than 250mm, such as iron wire, sheet material, pipe material and so on.
Main technical parameters:
parameter
Rated capacity
Rated voltage
Rated frequency
Maximum short circuit current
Of load rate
Maximum clamping force
Maximum forging force
Cooling water flow
Shape '
L * W * H
The average weight
Model number
UN1-25
25 kva
380 v
50/60 hz
11000 a
50%
3900 n
1500 n
150 l/H
90 * 80 * 120 cm
300 kg
UN1-35
35 kva
380 v
50/60 hz
15000 a
50%
3900 n
1500 n
150 l/H
90 * 80 * 120 cm
350 kg
UN1-50
50 kva
380 v
50/60 hz
19000 a
50%
3900 n
1500 n
150 l/H
90 * 80 * 120 cm
400 kg
UN1-75.
75 kva
380 v
50/60 hz
23500 a
50%
6100 n
2500 n
200 l/H
90 * 80 * 120 cm
450 kg
UN1-100.
100 kva
380 v
50/60 hz
26000 a
50%
6100 n
2500 n
200 l/H
90 * 80 * 120 cm
500 kg
UN1-150.
150 kva
380 v
50/60 hz
31000 a
50%
8000 n
3900 n
300 l/H
135 * 80 * 160 cm
550 kg
UN1-200.
200 kva
380 v
50/60 hz
35000 a
50%
8000 n
3900 n
300 l/H
135 * 80 * 160 cm
650 kg