The new flash welding machine is developed by the welding technology association of America and the welding equipment co., LTD., which integrates the new welding science and technology and USES the best components.
Good brand motor ensures the precise control of welding pace and lateral upsetting, better than the traditional hydraulic way, European technology of control system to ensure the accurate operation of the welding procedure and welding parameters, including difficult annealing.
The precision guide ensures the perfect docking of the workpiece, thus minimizing the reprocessing of the tool after welding. In the
Under the guidance of American experts, firelong welding co., LTD. Is fully equipped with the ability to process and manufacture the world's good machines.
When welding different workpieces, it is very convenient to adjust, only a few minutes.
The water-cooled transformer, thyristor and fixture ensure the machine's long hours of high load.
This universal type flash butt welding machine is an ideal choice for welding various small batches, multi-specification and multi-variety material products.
Technical parameters
Uns-150kva sparkle to the welding machine, suitable for the welding diameter not greater than 30mm low carbon
Steel, or copper bar with a diameter of no greater than 20mm.
DW-200KVA flash welding machine suitable for low carbon with diameter of no more than 45mm
Steel, or copper bar with a diameter of no greater than 30mm.
Cooling water flow: 12L/Min;
Pressure of air source: 0.6mpa;
Clamping force: 6,000 KGF;
Top forging force: 3,000 KGF.