Gear Head Lathe Mill Combo LMC-320

Features

◆ Adjustable height drill/mill head increases capacity.
◆ Large MT5 spindle bore.
◆ Large distance between center on longitudinal.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hand threads to cut.
◆ High precision chuck.
◆ A reversion switch is included for added versatility.
◆ Tail stock may be offset for turning taper.
◆ with the added control rod, it is easier to handle.

Detail Specification

Max.swing diameter over bed :  320 mm
Max.length of work piece : 750 mm
Max.swing diameter over tool carrier : 200 mm
Spindle bore : 38 mm
Taper of hole in spindle morse : No.5
Max.cross stroke over tool carrier : 150 mm
Max.longitudinal stroke over small tool carrier : 100 mm
Metric thread kinds on processing : 21
Metric thread pitch on processing : 0.45-6 mm
Inch thread kinds on processing : 28
Inch thread pitch on processing : 5-48 1/n”
Longitudinal feed on spindle tool carrier : 0.01-1.5/r
Cross feed on spindle tool carrier : 0.025-0.34/r
Max.stroke on taper hole : 80 mm
Taper of hole in tail stock : No.3
Spindle speed step : 12
Spindle speed scope : 60-1600 r/min
Electric motor 1 : 1.1 kw

Max.drilling capacity : 16 mm
Swivel-angle of head stock around the column : 360°
Spindle speed step : 4
Spindle speed scope : 260-2620 r/min
Taper of hole in spindle morse : No.3 or R8
Electric motor 2 0.37 kw

Net weight : 400 kg
Overall dimension : 1540*625*1750 mm