Multi-Purpose Lathe Mill Combo LMC-750

Features

◆ Compact, Multi-Purpose Lathe,versatile combination machine.
◆ Adjustable height drill/mill head increases capacity.
◆ Large MT4 spindle bore.
◆ Fine feed handle and clutch for precision milling.
◆ Headstock provides two step of feeds.
◆ Spindle is supported by high precision bearing.
◆ Headstock is constantly oiled during operation.
◆ T-slot cross slide.
◆ Adjustable gibs for the slideway.
◆ Power longitudinal & cross feed.
◆ Gearbox gets left and right hand threads to cut.
◆ High precision chuck.
◆A combination switch
◆ Tailstock may be offset for turning taper.

Detail Specifications

Max. Swing diameter over bed : 300 mm
Max. Drilling capacity : 20mm
Max. Length of work piece  : 750 mm
Distance from bench to spindle nose : 240-320 mm
Max. Swing diameter over tool carrier : 140 mm
Distance from spindle center and surface column : 310 mm
Spindle Bore :  26 mm
Swivel-angle of head stock around column : 360°
Taper of hole in spindle morse : NO.4
Mill and drill head stock vertical lifting : 80 mm
Max. Cross stroke over tool carrier :  200 mm

Spindle speed step : 9
Max.Long stroke over small tool carrier : 80 mm
Spindle speed scope : 315-2000 r/min
Metric thread kinds on processing : 14
Taper of hole in milling spindle morse : NO.3
Metric thread pitch on processing : 0.5-3
Inch thread kinds on processing : 20
Stroke on spindle hole: 80 mm
Inch thread pitch on processing : 11-40 1 /n’ ‘
Electric motor  : 0.37 kw
Longitudianl feed on spindle tool carrier : 0.003-10.1 34/ r
Net Weight : 400 kg
Taper of hole in tailstock : NO.1

Overall dimension : 1350x550X740 mm
Max. Stroke on taper hole : 80 mm
Voltage : 110V,60Hz/220V,50Hz
Spindle speed step 12
Spindle speed scope : 160-1600 r/min