PT-60 1001 SDH Multi-service Access platform

Brief Introduction

PT-60 1001 is a newly-developed optical fiber transmission equipment by Photel company based on SDH technology.It can designed as a STM-1/STM-4 level optical terminal with two 155Mb/s/622Mb/s optical interfaces to provide an ultra-compact, cost-effective and flexible multi-service platform.PT-60 1001can be used not only as a­n add-drop multiplexer (ADM), but also as a termination multiplexer(TM).

It manages to satisfy not only users’ needs forbroadband,narrowbandand other fiber optical transmission/access services, but also users’ needs forlarger capacityand more reliablecommunication protection. It also provides succinct and faultlessnetwork management functionwhich would carry out equipment configurating,fault-finding, data collecting and real-time monitoring on network performance. This item also features all of itscomponentsof industrial grade, comprehensive EMC and interface protection design.

 

Features

 

Standard 19-inch 1U chassis structure, easy to install.

220VAC/- 48VDC double power supply.

Two STM-1/STM-4 optical interfaces(SFP) with 1+1 channel protection.(Either one fails, the other will back it up)

ow interface

Integration of SDH, PCM, PDH and Ethernet.

Faultless network management feature, online real-time monitoring.

Provide up to 4 Ethernet networks with physical isolation.

Provide 16 E1s

Support networking mode: point to point, chain type, tree type, star type, ring type etc

In compliance with the ITU-T G.813 standards.

 

Specifications

 

Optical interface

Rate	155Mbps±4.6ppm	Adaptive fiber	Single/multi-mode
Consumption	-15 ~ -8dBm	Wavelength	1310nm/1550nm
Physical connector	SFP	Sensitivity	Better than -32dBm
Transmitting range	40km or further(with optical module)

 

E1 interface

Rate	2048Kbps	Code	HDB3
Comply with	ITU-T G.703 standard	Impedance	75Ω/120Ω
Frame structure	PCM30/31	signaling	Inbound Signaling
Channels	Up to 16

 

Ethernet interface

Rate	N × 2.048Mbps(N≤50)	Duplex	Full/Half auto-negotiation
Physical connector	RJ-45	Comply with	IEEE802.3

 

Power Supply

Input voltage	Standard value -48VDC or 220VAC
Voltage range	-36VDC~-72VDC,176VAC~264VAC
Power consumption	<10W

 

Operation Environment

Working temperature

-10°C ~ +50°C

Working humidity

<=90%(no condensation)

 

Application

 

 

Certifications

 

Company Information

We have been the professional manufactuer of PDH, PCM ,SDH,PBX etc.communication equipment for more than 15 years.

1.We provide OEM and ODM service.

2.We provide peoducts for military

3.We acceppt customer Oriented Equipment

4. Photel productsenjoy high quality and competitive price!

Welcome to Photel

PCB soldering process

 

Exhibition

Products show

 

Our Services

♦Payment

1.T/T by bank is our preferable payment method.

2.We also accept different payments,such as L/C, Western Union or as your demand.

3.We will send you our bank information in the PI, please note.

♦Shipment

1.Lead time based on our strong production capacity,normally one product can be ready within 1-3 days, if the quantity of the order is more than 500pcs,maybe we need a little more time.

2.Big order could be by sea or air.

3.We will send you in 3-5days after the full payment has been confirmed.

4.please provide your information:contact person name,company name,address,post code and telephone number in the PI.

♦Warranty

1.All products have been checked and packed in good condition after our serious QC test. If you have any question, please feel free to contact us, we would get it solved in limited time and our service would make you trust us.

2.Our equipment provide two years warranty, after two years you can renew the warranty.

♦Feedback

1.Hope we can have a long term cooperation.

2.We answer all your inquiries in 8hours or less guaranted,if you have any question about communication product please contact us.

3.If need our technical section will design solution for you.

4.We own the best after-sale service, our team will do our best to solve for customer when have any problem happen.

♦Contact us

 

E-mail:zyq@photel.com.cn

SKYPE:+8617712860139