Emergency Pipe Fix Kit Fiber Repair Fix Tape Made in China

Model:	UT003-UT006
Brand:	Unique-tech , OEM
Origin:	Made In China
Category:	Construction & Decoration / Pipe, Tube & Parts / Pipe Fittings
Label:	Emergency Pipe Fix , Pipe Seal Bandage , Fiber Repair Fix
Price:	US $0.9 / pc
Min. Order:	1000 pc

Inquire Now

Product Description

Emergency Pipe Repair Bandage Fiber Repair Fix Tape Made in China

Pipe repair bandage is an extremely convenient and effective product for the emergency repair of less severe pipe leaks on steel,HDPE, rubber hoses, ventilation ducts, plastic both underground and surface application. Quick and simple to use with no mixing or measuring required. A successful pipe repair can be achieved in only 30 minutes.

Emergency Pipe Repair Bandage Fiber Repair Fix Tape Made in China

Resin Makeup	Water-activated Polyurethane
Heat Resistance	150°C (300°F)
Pressure Resistance	Internal Pressure up to 15Mpa (5075psi)
Bonds to Most Pipes	Steel Polypipe PVC Fibreglass Copper
Set Time	20 – 30 minutes, sets under water
Chemical, Fuel and Oil Resistant	Acid lines Oils Gas Sea water MDISC

Emergency Pipe Repair Bandage Fiber Repair Fix Tape Made in China

For Pipe Repair Bandage,normal size as below: ( The length can be produced as your need)

NO.	Specification	Carton Size cm	Packing
UT002 (2inch)	5.0x360 cm/roll	60x40x41	1roll/bag, 10bags/box, 12boxes/ctn
UT003 (3inch)	7.5x360cm/roll	60x40x41	1roll/bag, 10bags/box, 12boxes/ctn
UT004 (4inch)	10.0x360cm/roll	60x40x41	1roll/bag, 10bags/box, 12boxes/ctn
UT005 (5inch)	12.5x360cm/roll	60x40x41	1roll/bag, 10bags/box, 9boxes/ctn
UT006 (6inch)	15.0x360cm/roll	60x40x41	1roll/bag, 10bags/box, 9boxes/ctn

* Clean and roughen the damaged area with the metal file or wire brush, which will help resulting a more successful repair.

*Knead Steel Putty and apply firmly into damaged area. Putty has a 2-5 minute work time, and the bandage application must begin during this time.
* Put gloves on,Soak bandage in fresh water for 10 seconds. Squeeze bandage 1-2 times while in water to help activation.
* Squeeze out the access water, apply the bandage spirally around the damaged pipe area. Extending up to 50mm (2″)either side of the leaked area.
* With wet gloves, squeeze the bandage with a rotating motion until resin stops foaming and is set.

Bond in 30 minutes Pipe Repair Bandage
Tips: To achieve the best result,the bandage should be more than 10mm thick (10-15 layers). Allow 30 minutes for bandage to set rock-hard.

Emergency Pipe Repair Bandage Fiber Repair Fix Tape Made in China

Contact: Mandy

mandy@unique-technology.com

Phone: +86 131 7522 3541

Tel: +86-574-85288851
Fax: +86-574-85567233

Address: 21F, Zimao District ,Ningbo China,PRC

https://www.unique-technology.com/

Emergency Pipe Repair Bandage Fiber Repair Fix Tape Made in China