laboratory-grade water purification systems feature an inspiring, application-oriented design. They enable you to perform your workflows faster and more reliably, simplifying your daily lab work while ensuring cost-efficient operation over the long term.

Typical Features:

1. Water Quality on-line monitoring; accurate and intuitive LCD panel digital display;

2. Polyethylene (PE) and polyacetal (POM) made pressure tank avoids secondary pollution;

3. Automatic water production and storage;

4. Produce RO pure water and UP ultra-pure water.

5. System flushing extends life span of reverse osmosis membrane 

6. Pressure alarm display.

7. Automatic water quality alarm.

Working Conditions:

Feed water have certain requirements. Feed water quality and environmental changes affect system’s capacity. Failure to meet the requirements of feed water may result in contamination and damage to membrane components. 

Source water : city tap water or groundwater

Minimum water supply pressure: 0.1-0.5MPa (pressure at minimum feed water flow rate.)

Water temperature: 5 ~ 35 ℃

PH range: 6 ~ 9

Solubility Total solids: TDS ≤ 200 mg / L (ppm)

Residual chlorine: ≤0.1mg / L (ppm)

Total iron: ≤0.1 mg / L (ppm)

Manganese: ≤0.5 mg / L (ppm)

Co2: <30 mg / L (ppm)

SDI: <5 mg / L (ppm)

Note: TDS >350mg / L ,the optional water softener should be taken into consideration

Our whole product line is not here, if you do not find what you need, pls just contact us as belowing