Technology Parameters:

 

Note: Customization is available.

Typical Features of  Lab water processing machine:

1. Automatic microcomputer ZYPFT big color touch screen LCD display, human-machine interactive interface allow you to fully monitor the working status of the controller and real-time data (resolution: HD,size: 111x62mm).

2. Online 3-way water quality monitoring;

3. Automatic RO membrane anti-fouling flushing (2-hour interval )

4. Comprehensive system maintenance and alarm

5. User-friendly manual / automatic water intake mode, and timing (1-99min), qualitative water intake function (0.1-18.2MΩ.cm)

6. Dual wavelength (185nm & 254nm)UV lamp components (imported lamp), effective sterilization, reduce TOC

7. MWCO5000DUF ultrafiltration module (imported), effective removal of heat (endotoxin), can be used for sophisticated cell culture and IVF

Working Conditions  Lab water processing machine:

Feed water have certain requirements. Feed water quality and environmental changes affect system’s capacity. Failure to meet the requirements of feed water may result in contamination and damage to membrane components. 

Source water : city tap water or groundwater

Minimum water supply pressure: 0.1-0.5MPa (pressure at minimum feed water flow rate.)

Water temperature: 5 ~ 35 ℃

PH range: 6 ~ 9

Solubility Total solids: TDS ≤ 200 mg / L (ppm)

Residual chlorine: ≤0.1mg / L (ppm)

Total iron: ≤0.1 mg / L (ppm)

Manganese: ≤0.5 mg / L (ppm)

Co2: <30 mg / L (ppm)

SDI: <5 mg / L (ppm)

Note: TDS >350mg / L ,the optional water softener should be taken into consideration.