Socket Phone(Jig):

1.Design for phone device test and system verify.
2.Phone device: CPU,flash,baseband,LPDDR,power IC.etc
3.Pitch range from 0.30 to 1.27mm
4.Key material: PEI,Peek,Torlon,PPS.etc
5.Contact with top pogo pin

Socket Feature:
1.Design a socket mount on phone PCB.
​2.Design a metal mask to fasten the socket and phone screen. 
3.Wired out the function with cable.
4.Test function including: Camera,download,phone call,power IC,system verification,USB,etc

Socket Specification:
Lid&house material:                             AL      
Insulation material:                            PPS,PEI,PeeK,Torlon
Contact material:                               POGO pin(spring probe),silicone rubber
Contact length:                                 Min2.5mm,Max7.2mm
Contact rated current:                          Max 6.2A
Contact temperature rating:                     -40 - +120℃
Contact preload:                                0.15mm,0.2mm,0.25mm(optional)
Contact force:                                  Min 6gf, Max 55gf
DC resistace:                                   Min 0.1ohm, Max100mohm
Life span:                                      Min 50k cycles, Max 100k cycles
Contact application pitch:                      Min 0.17mm
Contact material:                               top/bottomplunger: Becu/Au plated
                                                barrel: Pd Alloy, Alloy/Au plated
                                                spring: music wire/Au plated Stainless steel