Module Test Fixture:
1.Design according to customer's requirements
2.Use on auto or semi-auto test equipments and handler.
3.Pitch range from 0.30mm and above.
4.Pin amount: 2 and above.
5.Key material: Peek,Torlon,PPS,PEI.etc
6.Contact with top pogo pin

Socket Feature:
1.Design according to customer's requirements.
​2.High quality and high accuracy.
3.Offer timely after-sales service.
4.Offer on-site assemble and service.
5.Different structure design.
6.Module type including: CMOS module, Fingerprint sensor, FPC connector, MCM type, Wifi module, Bluetooth module,etc

Socket Specification:
Lid&house material:                             AL      
Insulation material:                            PPS,PEI,PeeK,Torlon
Contact material:                               POGO pin(spring probe),silicone rubber
Contact length:                                 Min2.5mm,Max7.2mm
Contact rated current:                          Max 6.2A
Contact temperature rating:                     -40 - +120℃
Contact preload:                                0.15mm,0.2mm,0.25mm(optional)
Contact force:                                  Min 6gf, Max 55gf
DC resistace:                                   Min 0.1ohm, Max100mohm
Life span:                                      Min 50k cycles, Max 100k cycles
Contact application pitch:                      Min 0.17mm
Contact material:                               top/bottomplunger: Becu/Au plated
                                                barrel: Pd Alloy, Alloy/Au plated
                                                spring: music wire/Au plated Stainless steel