Standards:ISO 13709/API610
Operating Parameters:Capacity Q: up to 300 m³/h ( 1320 gpm )/ Head H: up to 160 m ( 525 ft )/ Pressure P: up to 2.5 MPa ( 363 psi )/ Temperature T: -20 to 180 ℃ ( -4 to 356 ℉ )
Features:Low shear vortex pumping action/ The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver does not need to be removed if a spacer coupling is used/ Transport capacity of large solid particles in the medium / The impeller creates a vortex field in the casing which moves the fluid and solids minimizing contact with the hydraulic components.Only 15% medium contact with impeller / No wear ring and no throttle clearance/ Jack screws (motor side) for an easier alignment setting