Standards:ShengQuan
Operating Parameters: Capacity Q: up to 2000 m³/h ( 8800 gpm )/ Head H: up to 80 m ( 262 ft )/ Pressure P: up to 1.0 MPa ( 145 psi )/ Temperature T: up to 100 ℃ ( up to 212 ℉ )  
Features: Standard modularization design/ The rear pull-out design enables the bearing pedestal including impeller and shaft seal to be removed with the volute casing left in position. The driver does not need to be removed if a spacer coupling is used/ The standard seal arrangement has three options: gland packing,single mechanical seal and double seal/ Open impeller, conveying pulp concentration up to 8% / Replaceable wearplate/ Standard grease lubrication/ For the pulp slurry process, the use of cutting slot technology/ The pump rotation is clockwise when looking from the drive end./ Jack screws (motor side) for an easier alignment setting