G/EPON 1GE+CATV ONT is support Dual mode(EPON and GPON), It can also be applied to a wide temperature environment, and also has a powerful firewall function.G/EPON 1GE+CATV ONT meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband access, TV and other requirements. The box is based on the mature Gigabit GPON/EPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
| Technical item |
1GE+CATV |
| Optical interface |
1 G/EPON port(EPON PX20+ and GPON Class B+) (SC/APC)Receiving sensitivity: ≤-28dBmTransmitting optical power: 0～+4dBmTransmission distance: 20KM |
| Wavelength |
Tx 1310nm, Rx 1490nm |
| LAN interface |
1x 10/100/1000Mbps auto adaptive Ethernet interfaces Full/Half, RJ45 connector |
| LED |
5, For Status of POWER、LOS、PON、LAN、CATV |
| Operating condition |
Temperature: 0℃～50℃Humidity: 10%～90%（non-condensing） |
| Storing condition |
Temperature :-30℃～60℃Humidity :10%～90%（non-condensing） |
| Power supply |
DC 12V/0.5A |
| Power consumption |
≤4.2W |
| Dimension |
100mm×92mm×30mm（L×W×H） |
| Net weight |
0.13Kg |
| LED |
Mark |
Status |
Description |
| Power |
POWER |
On |
The device is powered up. |
| Off |
The device is powered down. |
| Registration |
PON |
On |
The device is registered to the PON system. |
| Off |
Device is not registered to the PON system. |
| Blink |
Device registration is incorrect. |
| Optical signal loss |
LOS |
Blink |
Device does not receive optical signals. |
| Off |
Device has received optical signal. |
| LAN |
LAN |
On |
Port is connected properly. |
| Off |
Port connection exception or not connected. |
| Blink |
Port is sending or/and receiving data. |
| CATV |
CATV |
On |
CATV Output is on |
| Off |
CATV Output is off |
