Model :HFS-DC06-12V
Size : 39.5*22.7*12mm
High Frequency:5.8G Band:ISM
Output Method:TTL ; Minimum Input Current: 30mA
Input Voltage:DC12-30V (Input voltage need to go through voltage stabilization, no load voltage should be ≤30V)
Wiring: VCC connecting with power positive, GND with power negative, GND and OUT with TTL signal
Installation Height:2-6m; Detective Distance:0.5-5m Adjustable;
Detective Range: Straight right Cone 360° ; Detective Time:2-120s Adjustable
Features: 5.8GHZ, it does not interfere with each other with the normal installation and usage, high stability, strong anti-interference ability, small volume, suitable for all kinds of DC microwave module products.
Notes:1, It is noted that the input current should be ≥30mA to drive the module. And the voltage should be stable without big fluctuation. Otherwise, it will cause continuous trigger (the load lamp may be continuously triggered by itself or couldn’t be went out)
2, For its working properly, avoiding being installed in the side of a large area of metal , avoiding being put in a completely closed metal shell.