Advantage

1. Less overflowing : lower Milt index 5-6;

2. Best optical performance and safety performance : 85-95% cross-linking at 130- 150°C laminating.

3. Superior water-proof: open edge application

4. Best anti-aging and durability in outdoor application.

5. Crystalline particle control make EVA film more transparency and cleanliness.

Specification

1. The best mechanical performance: 

2.Superior optical performance:

3.Best durability an stability in outdoor climate application:Heat and humidity resistance,Radiation resistance,ball impact peeling test and shot bag impact have been tested for laminated glass with norminal thickness according to GB15763.3-2009 safety glazing materials in building-Part3:Laminated glass

Instructions

1. Prepare and cut the EVA film into right size according to the following structure:

glass+EVA film + glass

2. Put the overlapped glass into silicon bag and seal silicon bag well. 

3. Activate vacuum pump for 5-8min till vacuum value reach -0.095Mpa to double checking the vacuum is good. 

4 Set up the laminating temp. and time and start heating.The following data based on 5mm glass +0.40mm EVA +5mm glass.

Remark: The above curves only for reference, the user should do some adjusts according to the process surroudings(temperature and humidity), glass area, glass thicknes,glass type and the machine itself.