Instructions

1. Prepare and cut the EVA film into right size according to the following structure:

glass+EVA film + glass

2. Put the overlapped glass into silicon bag and seal silicon bag well. 

3. Activate vacuum pump for 5-8min till vacuum value reach -0.095Mpa to double checking the vacuum is good. 

4 Set up the laminating temp. and time and start heating.The following data based on 5mm glass +0.40mm EVA +5mm glass.

Remark: The above curves only for reference, the user should do some adjusts according to the process surroudings(temperature and humidity), glass area, glass thicknes,glass type and the machine itself.