Internally Threaded Anchor

our company develops and manufactures more than 10 kinds of series products: undercut anchors, self-undercutting anchors, undercut panel anchors, adhesive anchors (chemical anchors), carbon fiber fabric (Japan Toray filament, Tairyfil), carbon fiber sheet, carbon fiber plate, prestressed anchorage device, carbon fiber adhesive, crack sealing adhesive, steel bonding adhesive, anchorage adhesive, crack filling adhesive, weather proofing sealant, structural adhesive, cast-in channels and so on.

Directly made of raw material without any special treatment, which ensures its mecahnical property.  Suitable for small edge distance & small spacing distance, and most suitable for repeated fixing of anchor rod with equal length. 

▪The drop-in anchor is directly made of raw material without any special treatment, which ensures its mecahnical property.

▪Suitable for small edge distance & small spacing distance

▪Most suitable for repeated fixing of anchor rod with equal length 

▪Low drilled hole depth

▪Knocked by pneumatic hammer or hammer, construction is easily conducted

▪Expansive surface is concavo convex which ensures the anchoring force

▪Various drilled hole depths are available, ensuring excellent load bearing capacity

▪When drop-in anchor is hammered, internal thread will not be destroyed

▪The installation can be tested by visual inspection

small edge distance Internally Threaded Anchor Applications:
Fixing of tube bundles and pipelines
Fixing of air-conditioning system 
Fastening of base material
Fixing of spraying system
Middle-sized load or below