Vertical Slurry Pump

HL Series

HL vertical centrifugal slurry pump, immersed in liquid, used to transport abrasive and coarse particles, high concentration slurry. It does not require any shaft seal and shaft seal water, and it can work under the condition of insufficient intake normally.

The HL series submerged pump flowing through parts are made of silicon carbide ceramic, which has good wear resistance, corrosion resistance and long service life. It is especially suitable for various pit pumps in mines, coal and desulfurization system.

 

 

 

Structural Characteristics of Vertical Slurry Pump

• Adopt vertical cantilever structure
• Adopt silicon carbide ceramic impeller, with a removal ring, easy to remove impeller;
• The flow parts are made of ceramic materials, with excellent wear resistance and corrosion resistance, which can improve the overall service life of the pump;
• The cylinder bearing components adopts high capacity bearing design, and using grease lubrication;
• Adjustable impeller and the clearance between the boards to ensure efficient operation of the pump;
• No shaft seals required;
• Choose direct drive for pump and drive machine, using v-belt drive at the same time.

 

 

 

 

 

 

 

 

HL Vertical Slurry Pump Parameter Chart

Type	Allowable Max Power (KW)	Performance Range				Impeller
		Q (m3/h)	H (m)	N (r/min)	η %	No. of Impeller	OD of Impeller
HL 40	15	1944--43.2	4.5--28.5	1000--2200	40	5	188
HL 65	30	23.4--111	5--29.5	700--1500	50	5	280
HL 100	75	54--289	5--35	500--1200	56	5	370
HL 150	110	108--479.2	805--40	500--1000	52	5	450
HL 200	110	189--891	605--37	400--850	65	5	520
HL 250	200	261--1089	7.5--33.5	400--750	60	5	575

 

User Case

Under the strong abrasive condition of the mine, the service life of the ceramic pump is 3-5 times that of the metal pump. The maximum particle size of the slurry in the existing case can reach 25mm, which means the needs of all the pumps in the beneficiation process.

 

 

 

SIC CERAMIC PUMP

With the features of high hardness, stable molecular structure, high temperature resistance, good performance of anti-abrasion and corrosion resistance, silicon carbide that as a kind of mature anti-wear material, can be widely applied in the field of industries, such as mining, metallurgy, electricity, chemical engineering, and so on.

In slurry industry, the working condition are mainly based on highly corrosive and abrasive media. The harsh environment requires that the material of lining of the wet parts has good abrasion and corrosion resistance, while silicon carbide (including silicon nitride bonded silicon carbide ceramic and resin bonded silicon carbide composite ceramic) is the best choice.

Silicon carbide pump, designed and manufactured by SICAH, show high performance and long lifetime in working, which helps customers to reduce the frequency of overhaul and save more cost.

 

Why to choose SiC Ceramic Pump?

SiC served as a kind of mature anti-wear material, and has the features of high hardness, stable

molecular structure, and good performance of anti-abrasion, corrosion resistance, high temperature

resistance etc. It has been widely applied for mine, metallurgy, electricity, chemical engineering etc.

In slurry pump industry, the working condition are mostly with high corrosion and abrasion, which are

quite terrible. That requires material of flow-through parts to be endowed with favorable anti-abrasion

and anti-corrosion performance, while SiC ceramic is the best choice.

SiC ceramic pump, designed and manufactured by SICAH, shows high efficiency and long lifetime in

working, which helps customers to reduce the frequency of overhaul and save more cost.

Contact

Tel: 0086-136-33852636

Email: caec.sara@gmail.com

http://www.sicah.cn

Sales Manager: Sara Wang

Henan Si&C Co., Ltd