Building Access Control Turnstile Flap Barrier Automatic With Polishing Surface

Model:	RNCF8066
Brand:	RONA
Origin:	Made In China
Category:	Security & Protection / Access Control System
Label:	Sliding Gate , More Security Gate , Sliding Turnstiles
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

Building Access Control Waist Height Turnstiles Automatic With Polishing Surface

Introduce of sliding turnstile gates :

Integrating mechanism, electronics and micro-processor advanced technologies.The wasit height turnstile is a improvement of intelligent tripod turnstiles.Equip various card-reading machines with hi-performance security protection to realize real-time warning and clever LED counter display guide passers .it balance pedestrian intelligent control and management.
sliding turnstile gates designs with tailored stainless steel make its elegance-looking,durable and anti-oxidation .Considering unique requests,we built-in standard electrical interface to best-fit customer easier using magnetic card,barcode,ID&IC cards integrated .This system provides civilized,well-organized pass management and meantime its prohibit illegal persons entry&out

SPECIFICATIONS of waist height turnstile

1	integration system	RFID system , face recognition system , ESD system
2	Frame material	304 stainless steel
3	Frame Size	(W)310x(L)1400x(H)1000mm or customized
4	Drive	serve motor
5	Rotation direction	bi-directional and unidirectional
6	Controller	dapts micro-computer controller can be 7 programmed according to customer needs
7	Interface:	standard input and output interfaces can be used for other integration systems
8	Signal source	dry contact and high-low level signals
9	Working voltage	220V AC ±10%
10	Voltage:	220V AC ±10%, 24V DC at 3A ±10% and 12VDC at 3A ±10%
11	Indoor/outdoor temperatures	-10to 70°C
12	humidity range	95%
13	Switching time	1s
14	Traffic speed	30~35 persons/minute
15	Fault status	power-off and giving free exit/entry path
16	Movement failure rate	More than 5millions
17	Waterproof	Yes
18	Card reader area	2

Functions and Features of the sliding gates :

1. Problem-self-checking function.

2. Many options of working ways: bi-direction card reading; one direction card reading and another no reading; one direction card reading and another freely. And single direction photocell controlled passing and close. Working ways can be set in the control panel.

3. When power off, arm open automatically and power on again, arm will be held automatically.

4. When valid card read and passenger passed, arm can be delayed to close from 1-60s which can be set in the control panel.

5. Auto-reposition function: After card read, passenger not pass within regulated time period, full-height turnstile will cancel this passing right. And the regulated time period for passing can be set by managers.

6. If passenger pass without card read or valid card read, flap barrier will alarm untill passenger get back from the flap barrier and then take a valid card to be read for passing.

7. Flap barrier is with 485 interface for long-distrance control concern.

8. Anti-rush function: if there is no open single, arm will be holding tightly.

9. Double anti-clipping function: photocell anti-clipping and mechanical anti-clipping.When passenger is going through the flap barrier, photocell will detect out this situation and will not close. After passenger passed, arm will close automatically. During its reposition, if arm meets any obstacle, arm will get back automatcially or stop working for a while with very slight force. Also it will alarm.

10. Flap barrier is with standard electrical interface for the integration of various readers and writers.

11. Flap barrier can count how many passenger has passed and will show it in the LED display.

12. Direction display to guide passenger which direction is to go.

13. Card-reading with memory or without memory function.

14. Flap barrier can control the population inside in the control of software.

15. Stable running with little noise.