Rubber Release Agent 1, product description: rubber release agent is SILICON as the main body, and grinding into a high-performance emulsion release agent, in line with European and American environmental standards, through SGS environmental certification, non-toxic non-irritating smell, it can form a heat stable film between the mould and the product, which makes the surface smooth, does not corrode the mould, does not dissolve with rubber and plastic, and is convenient for demoulding. At the same time, it can also keep the excellent lubrication state between metal and non-metal, reduce the cost of die maintenance. Because of its high stability, it can be used with water at will, without layering or oil separation, and can be used in severe temperatures-70 ~ 350 NIE degrees. Traits and data indicators: 1. APPEARANCE: Milky White Liquid or Milky Blue Liquid 2. INGREDIENT: Silicone Oil and special Surfactant 3. ACTIVE INGREDIENT: 100% 4. IONIC: 5.Ph : 6.5 ~ 76. SOLUBILITY: extremely soluble in cold water. Specific gravity: 0.985. FEATURES: 1. Easy to dilute, easy to use, when the mold temperature is still very stable. 2. Long Shelf Life, sealed and room temperature storage up to 1 year. APPLICATION: this product is generally used for rubber products (tire, rubber sheet, rubber plug, Conveyor Belt, rubber pad, rubber sole, rubber ring, rubber shoe, rubber tube, rubber rubber rubber rubber sleeve, rubber gloves, etc. . Dilute with water as needed, then spray directly onto the mold with a spray gun or a brush / rag. 2. ... 5... ... i-200 times thinner. Packaging, storage and transportation: 1. This product packing specification is 50kg / barrel or 200K / barrel, may also pack according to the customer request. 2. This product according to the non-dangerous goods storage and transportation, should be stored in a dry ventilated cool place, to avoid strong sunlight exposure and acid, alkali contact.