Zinc-aluminum alloy die casting mold release agent product description: zinc-aluminum Alloy die casting mold release agent CX-360 is a high-performance emulsion mold release agent which is mainly made of SILICON and grinded, to form a heat-stable film between the mould and the product, resulting in a smooth surface, no corrosion to the mould, no dirt left on the mould, no miscibility with the zinc-aluminum alloy, convenient demoulding, and at the same time, good lubrication between the metal and the non-metal, reduce the cost of die maintenance and repair. Because of its high stability, it can be used with water at will, without layering or oil separation, and can be used in severe temperatures-70 ~ 350 NIE degrees. Traits and data indicators: 1. APPEARANCE: Milky White Liquid or Milky Blue Liquid 2. INGREDIENT: Silicone Oil and special Surfactant 3. Active ingredient: 99.99% 4. IONIC: 5.Ph : 6.5 ~ 76. SOLUBILITY: extremely soluble in cold water. Specific gravity: 0.985. FEATURES: 1. Easy to dilute, easy to use, when the mold temperature is still very stable. 2. Long Shelf Life, sealed and stored at room temperature up to 1 year. Product application: this product is generally used for zinc and aluminum die-casting products (electrical aluminum rotor, motor back plate, motorcycle engine Shell, motorcycle parts, automobile engine Shell, auto parts, electric iron bucket bottom plate, airplane parts, etc. . How to use it: 1. Dilute with water as needed, then spray directly onto the mold with a spray gun or a brush / rag. 2. ... 200... ... ... 400 times thinner. Packaging, storage and transportation: 1. This product packing specification is 50kg / barrel or 200K / barrel, may also pack according to the customer request. 2. This product according to the non-dangerous goods storage and transportation, should be stored in a dry ventilated cool place, to avoid strong sunlight exposure and acid, alkali contact.