Ask for quotation, please send email to bebon.steel@outlook.com.

Grade A and B Steel Plate in Offshore and Marine
Grades: A, B, D, E  Steel - Common Strength Steel in Offshore & Marine
Grades: A, B, D, E
According to its yield strength, shipbuilding plate of can be divided into below grades:
Grade A steel is the impact force subjected to normal temperature (20 ° C).
Grade B steel impact force at 0 °C.
Grade D steel impact force at -20 °C.
Grade E steel impact force at -40 °C.
AH36, DH36, EH36 Steel - Common Use High Strength Steel in Offshore & Marine
For the high strength shipbuilding plates like AH36, DH36, EH36 steel plate, they have been widely used in high stress areas of ships, comparing with general strength steel, they are offering the same strength with the smaller thickness. 

Dimensions Range for Grade A and B Steel Plate in Offshore & Marine
Thickness Range: 5 mm -150 mm
Width Range: 1500 mm - 3900 mm
Length Range: 6 m, 12 m, coils
Processing for Different Grades
Grade A and B
The general strength of grade A and B shipbuilding steel plates can meet the requirements of process and mechanical properties through ordinary rolling, so the production process is relatively simple.
Grade D, E (DH32, DH36, EH 32, EH 36)
Grade D and E series (inlcuding AH32/36, DH32, DH36, EH32, EH36) shipbuilding steel plates require good low temperature toughness and good welding performance. The production high-strength shipbuilding steel plate needs to be normalized by means of controlled rolling and controlled cooling or heat treatment processes with more complete equipment. At the same time, the internal steel purity of the supplied billets is required to be high, especially the content of S, P, N, 0 and H in the steel should be strictly controlled.

Contact us

www.bebonchina.com

www.steel-plate-sheet.com

Emai: asteelgrade@gmail.com 

bebon.steel@outlook.com