2k topcoat-pure solid color tinters Automotive Coatings

Model:	1k 2k S P
Brand:	rapicoat
Origin:	Made In China
Category:	Chemicals / Coatings, Varnish & Painting
Label:	car paint 2k solid , auto repair coating , ceramic car coating
Price:	US $5.15 / liter
Min. Order:	60 liter

Inquire Now

Product Description

we are professional automotive car paints manufacture included:

1,auto base car paints

2,vanish paint

3,2k epoxy topcoats

4,1K Auto Refinish Paint

5,2k primer surfacer

6,polyester putty

7,2k acrylic clearcoat

weather resistance good coverage good filling ability ,good match to original with favourable price.

expect further coopearton!

2K solid color B series
2K senior two-pack solid color, with properties of hard paint film, high gloss and build with good resistance and hiding power. The color is bright and long lasting.
Substrates	Dried and sanded existing finishes or primer
Substrates treatment	Remove paint dust and contaminations with degreaser
Mixing Ratio	Name	2K Solid color	Hardener	Thinner
	Volume Ratio	100 parts	50parts	20-30parts
pot life	4 hours@20degree
Spray viscosity	16-22 Seconds@20 degree
No. of Coats	2-3 coats
Flash-off time	10-15 Minutes
Each thickness	40-60 Micron
Spray Pressure	RP Gravity Feed1.2-1.4mm 2.0-2.5 bar HVLP Gravity Feed 1.2-1.4mm 2.0 bar
Drying Time	Temperature	Dust Free	Dry to Handle	Thorough Dry
	24 hours@20 0C	30minutes	10hours	1day
	1 hours@600C	15minutes	1hours	1hour
Sandability and Polishability	wet sanding P800 P1000 sand paper if need polish.
Shelf Life	3 years in original sealed
Package	1LX12tins/ctn、4LX4tins/ctn
1．Remains of water in the sanding marks is harmful to the property of paint film. If the substrate is prepared with P800-P1000 wet, blow dry the surface with spary gun.
2．At temperature lower than 15℃, air-dry at ambient temperature is not recommended. Allow a full bake at 60℃.
3．At ambient temperature higher than 30℃, add Retarder Solvent into thinner to avoid blushing. Details please refer to the technical data sheet of Retarder Solvent.
4．In the event of fisheyes during application, add 0.5-1% Anti Silicon in the paint remained and re-spray the affected area.
5．In the overspray area of new and existing finish, apply directly Thinner SRA to achieve an invisible transition. Details please refer to the technical data sheet of Thinner SRA.
6．The products mixed with hardener should be used up soon and can not restore for future use.
7．Clean equipments immediately with solvent after application.

1K Basecoat Colors A,S,P
Characteristic: Made from weathering resistant resins,the high quality basecoat is with good hiding power,excellent metallic effect and easy to apply.Fast drying single component metallic basecoat for refinishing or general purpose automobiles with excellent metallic effect and easy to apply. Available in solid, silver and pearl colors.
Substrates	Dried and sanded existing finishes, primers
Substrates Treatment	Remove paint dust and contaminations with degreaser before sanded
Mixing Ratio	Temperature	Name	1K Basecoat Color	Thinner
	According to temperature to choose the Hardener and Thinner	Volume Ratio	1part	1-1.2part
Remarks	At high temperature,it is recommended to use slow thinner or add proper retarder solvent to avoid mottling.
Pot Life	24 hours at 20℃
Spray viscosity	16-22 Minutes at 20℃
No. of Coats	2-3 coats, total 15-25um
Flash-off time	At 25℃, 5-10 minutes between coats. Allow 15-20 minutes air-drying time before applying clear coat.
Each thickness	10-20Micron
Spray Pressure	Gravity Feed 1.2-1.5mm 2-4kg/cm2 Siphon Feed 1.4-1.7mm 2-4kg/cm2
Drying Time	Temperature	Dust	application time of next process
	200C	5 minutes	10-15mintutes
Sandability and Polishability	Use over P1000 sand paper if need polish
Shelf Life	3 years in original sealed (can continue to use after passing inspection )
Packaging	1LX12tins/ctn、4LX4tins/ctn