UF Braced tubular membrane for acid and alkali recovery
 

Product Description

Braced tubular membrane module

Type

Tubular membrane

Membrane material

PES

Housing

Stainless Steel

Max operation pressure

8 bar under 49℃

Max pressure on permeate side

0. 2bar

Max operation temperature

60℃

pH scope

0-14

Max allowed total chlorine

200ppm under pH10-10. 5, 49 ℃

Model

KMTB-S-SD-0412 (4",12',2.5 ㎡ )

KMTB-S-SD-0512 (5",12',5.2 ㎡ )

Application

Acid and alkali recycle

Fills the Market Gap : Conventional technology is complicated with high operating cost, which wastes resources and increases environmental costs. Kaimi's self-developed tubular membrane has strong resistance to acid and alkali, which is the most effective technology with the highest degree of automatic control at present.

Patented Tubular Technology :  Braced tubular membranes with 12.5mm channels can tolerate 15% H2SO4 and 20% NaOH, whose recovery rate can reach up tp 90%, can effectively extract the recyclable constituents, to achieve cost efficiency. 

Dual-Membrane Technology:  Kaimi focuses on full process design, synthetically considering cost, efficiency and effect, accumulating experience and pushing out  the most effective and efficient solution.

Advantages of braced tubular membrane system  in recoverying of waste acid and alkali :

Tubular membrane module with the PH range of 0 to 14
Membrane has strong antifouling property, high regeneration performance and long seervice life.
High degree of automation systems, low cost of labor
Good flux recovery, easy to clean
Reasonable process configuration, high flux
Membrane is unbreakable and not easy to break and easy to replace, singel membrane can be indepensently replaced.
Greatly reduce the cost of production
Clean production, acid-base reuse, reduce emissions