MF and UF ceramic membrane for liquid filtration
 

Product Description

Ceramic membrane

Type

Inorganic tubular ceramic membrane

Membrane Material

Aluminia, Titania or Zirconia

Housing

Stainless Steel 304 or 316

Module element quantity

1, 7, 19, 37, 61, 91, 139

Pore size

0.8μm, 0.2μm, 50nm, 10nm, 1000Da

Compression strength

1.0Mpa

Length

1016mm or 1200mm

Application PH

0-14

Applicable temperature

0-150℃

Filtartion

Microfiltration or Ultrafiltration

Max allowed total chlorine

200ppm under pH10-11, 49 ℃

Application

Juice clarification, fermentation, biotech, pharamaceutic, emulsified oily, chemical, etc

 
Ceramic membrane is the precision casting porous ceramic filter. Driven by TransMembrane Pressure, runs as Cross Flow Filtration mode, for separation, concentration and purification. It is made of Alumina, Titania or Zirconia oxide; can serve as Microfiltration, Ultrafiltration and Nanofiltration.  
 
KAIMI has over 18 years ’  experience in ceramic membranes. We set up membrane systems, also take projects. And we have patented or own technology. Besides rich experience ensure that we could meet your requirements about MF&UF membranes.
 
Membrane Advantages:
1.  Good chemical stability, excellent resistance to acid, alkali, oxidation chemicals and organic solvents
2.  High temperature resistance, easy to clean , sterilize and back-wash
3.  Good biochemical compatinility and antimicrobial resistance
4.  Great m e chanical strength and abr a dability
5.  Fine separation accura c y with narrow pore size distribution

For more information,  be free to visit website or email us.