Self priming water pump

Chemical-Resistant self priming pump 

Type:JKB-L series

Power:5-10HP

Frequency:50HZ/60HZ

Capacity:800~900 L/min

Head:30-36m

The corrosion-resistant self-priming pump is suitable for lifting and conveying of industrial sewage treatment, acid unloading, electroplating liquid circulation, supporting filters, chillers, etc.

Certification: ISO9001:2015,CE certification,Production&sales intellectual property management system certification;

Self priming water pump detailed description

https://www.jkpumpbiz.com/self-priming-pump/

1. The material of pump body made from FRPP or PVDF suitable for chemical and corrosive environment.

2. It is designed with self priming vacuum, an extremely powerful self-priming force & built with a choke valve fully prevents liquid back-flow into the pump.

3. To protect the pump:

· To prevent foreign material from entering the suction inlet, foot valve should be installed at the inlet.

· To prevent immediate back-flow, check valve should be installed at the outlet.

· Back-flow into the pump can cause the pump’s body damage as well as dry-running.

4. Depending on customers’ needs, the cooling circulated tube can be assembled. The liquid inside the pump circulates and cools down the shaft seal especially during dry-running.

5.The self-priming centrifugal pump-JKB-L series best applicable to acid and alkaline chemical liquids, all polluted water treatment & etc.

MODEL INDENTIFICATION

 JKB-L  -F   -75  -07   -2   -N   -C   -C   -S   -5    

 1    2     3       4      5      6      7      8     9    10   

1	MODEL	JKB-L
2	MATERIAL	F - FRPP     P- PVDF
3	IN/OUTLET	75-3"
4	POWER	07-7.5HP, 10-10HP
5	POLE	2-2P  4-4P
6	O-RING	N -VBR    E -EPDM     V -VITON
7	STATIONARY	C-CERAMIC    S-SIC
8	ROTATIONAL RING	C-CARBON    S-SIC
9	SPRING	SUS316
12	FREQUENCY	5-50HZ     6-60HZ

Where to use the self priming pump?

1. Industrial self-priming pump is suitable for urban environmental protection, construction, fire protection, chemical, pharmaceutical, dye, printing and dyeing, brewing, electric power, electroplating, papermaking, petroleum, mining, equipment cooling, oil tanker unloading, etc.

2. Self-priming water pump is suitable for clean water, sea water, chemical medium liquid with acidity and alkalinity, and slurry with general paste. The viscosity of the medium is ≤100 CP, and the solid content can reach 30% or less.

3. It can be used with any type and specification of filter press, the most ideal matching pump type to send the slurry to the chemical filter housing.

4. Applications from water, fuels, effluent or”grey water”, right through to raw sewage, industrial wastewater and sewage sludge can be effectively handled by self priming centrifugal pumps.

Self priming pumps are mounted above the liquid source generally at “ground level”, so less infrastructure is required to set them up. And because they are located at ground level, they are easier to access and much easier to maintain and repair. As there is no mechanical equipment in the wet well, there is no need to open wet well lids, and there is no need for hoists or cranes as in the case of submersible pumps, making them a much safer option for operators.